Search found 42 matches

by BEN HOLM
Tue, Feb 09 2010, 5:14PM
Forum: eCabinet Systems Software
Topic: Define Hardware Problem
Replies: 3
Views: 560

Re: Define Hardware Problem

Im also having some problems in this area. Not the same one of course. For me im going through and loading all my hardware with the vender, web site, price, and picture. Well only sometimes if I am, say, adding a drawer slide under the Slide tab then I switch to the Hinge tab do those then switch ba...
by BEN HOLM
Thu, Feb 04 2010, 11:16PM
Forum: eCabinet Systems Software
Topic: Strange numbers in cut list. Please help
Replies: 2
Views: 405

Re: Strange numbers in cut list. Please help

Here is the cabinet if any one wants to check it out to see if you come up with the same results.
by BEN HOLM
Thu, Feb 04 2010, 11:13PM
Forum: eCabinet Systems Software
Topic: Strange numbers in cut list. Please help
Replies: 2
Views: 405

Strange numbers in cut list. Please help

Ok all done with my job and go to get my cut list and find out how much material I need to go get and I get -2147483647 sheets of melamine. Whats going on? I narrowed it down to one cabinet that was making it happen. anyone ever gotten this before? How do I fix this? Here is a screen shot of the cut...
by BEN HOLM
Mon, Jan 25 2010, 7:54PM
Forum: eCabinet Systems Software
Topic: Need to make a door with a center style
Replies: 14
Views: 1552

Re: Need to make a door with a center style

You can use what ever door you want to add it to all your cabinets then just add a display board in the middle. If you make the display board like 11/16" instead of 3/4" then you can make the display board a little longer then the panel opening and just set it into the door 1/32" and ...
by BEN HOLM
Sun, Jan 24 2010, 12:38PM
Forum: eCabinet Systems Software
Topic: Is it possible to have both v5.2 and v6 on the same computer
Replies: 2
Views: 564

Is it possible to have both v5.2 and v6 on the same computer

So is it possible to have both old and new on the same computer if you just give it another folder to install to? I have not upgraded yet but would love to play around with it and still have a fully working 5.2.
by BEN HOLM
Sat, Jan 23 2010, 11:30AM
Forum: eCabinet Systems Software
Topic: Whats better upgrade to v6 or new install?
Replies: 1
Views: 366

Whats better upgrade to v6 or new install?

I was so excited to hear V6 was out the day they announced it but by the time I looked at the Forum there was already problems. I was mid way in a few jobs and did not want to take the risk. Fist of all is it worth going to V6 yet? and second is it better to go with an upgrade or a full new install....
by BEN HOLM
Sun, Dec 20 2009, 6:35PM
Forum: eCabinet Systems Software
Topic: Adding molding
Replies: 5
Views: 866

Re: Adding molding

Yea that would be nice. But it really is not that hard to do. The online training videos tell you to draw up the whole kitchen first in custom layout with all the cabs in it then click on just one cab in each run press "E" to edit that one cab and add the moulding to it for the whole run. ...
by BEN HOLM
Mon, Dec 07 2009, 10:31AM
Forum: eCabinet Systems Software
Topic: edgebanding and part editor
Replies: 2
Views: 487

Re: edgebanding and part editor

Yea I ran into that two weeks ago too when I wanted to put a profile around the edge of the drawer. I pulled it into the part editor, didnt notice at that time, then did my profile. Everything looked perfect in part editor but then as soon as I went back to the cabinet the edge banding was still the...
by BEN HOLM
Sun, Nov 22 2009, 5:02PM
Forum: eCabinet Systems Software
Topic: Need help with custom end panels
Replies: 13
Views: 1205

Re: Need help with custom end panels

THATS IT KERRY!
That is what I was looking for! So hard to get your mind to think outside the box like that sometimes. haha
Thanks a lot all for your quick replies, very helpful!

BEN :D
by BEN HOLM
Sat, Nov 21 2009, 5:15PM
Forum: eCabinet Systems Software
Topic: Need help with custom end panels
Replies: 13
Views: 1205

Re: Need help with custom end panels

Yes that great. BUT. What I'm trying to get is: See in your picture that the left rail of the door buts up to the back of the face frame. So when its all sanded and stained/painted that left rail of the door looks 3/4" bigger then the right. And for the top and bottom I put like a cove molding ...
by BEN HOLM
Sat, Nov 21 2009, 4:00PM
Forum: eCabinet Systems Software
Topic: Need help with custom end panels
Replies: 13
Views: 1205

Re: Need help with custom end panels

Yes I used conastoga crp-10797. So for now I just did it the only way I know. Face frames at the size I want and a back panel then add display boards with the profiles that I want on them. If you look close the molding just overlaps itslef instead of a mitter. Not sure if that will be noticable yet....
by BEN HOLM
Sat, Nov 21 2009, 1:32PM
Forum: eCabinet Systems Software
Topic: Need help with custom end panels
Replies: 13
Views: 1205

Need help with custom end panels

Ok I Do a few furniture pieces like dressers that I build an aplied panel on the sides. Its just like a door but I use but joints with pocket screews on the back, rout out a rabbit on the back and set a 1/4" plywood flat panel stapled to the back of the frame, then I use bead, base cap, or cove...
by BEN HOLM
Wed, Nov 18 2009, 10:36PM
Forum: eCabinet Systems Software
Topic: Version 6.1
Replies: 13
Views: 1562

Re: Version 6.1

I agree with the LDE request. For me, not sure about the rest, I have AutoCad and am really fast at that so the LDE is real disapointing. But Im not complaning about eCabs at all I love it just the way it is but if we are talking about the improvements then how about being able to take Elivation vie...
by BEN HOLM
Mon, Oct 12 2009, 10:34PM
Forum: Lounge
Topic: Labor Question
Replies: 4
Views: 1521

Re: Labor Question

I have to agree. I do a lot of trim work and crown. I even charge about $8-$10 a foot for basic 3"-5" paint grade crown. Depending on how big the job is. If its a whole house then I go more like $8 if its a room or two it more like $10. Also were are you? Im in Southern California all pric...
by BEN HOLM
Mon, Oct 12 2009, 10:27PM
Forum: eCabinet Systems Software
Topic: Online training
Replies: 2
Views: 666

Online training update

Ok so its been about a month since I got the Online training Videos. They are Great! Like I said before I have been using eCabs for about a year and do ok, but so far I have watched almost half the videos. There is a lot! A lot of things are things that I knew already but I have learned a lot of thi...

Go to advanced search