Search found 431 matches

by Nat Wheatley
Fri, Mar 15 2013, 4:27PM
Forum: eCabinet Systems Software
Topic: Camar cabinet hanging brackets
Replies: 2
Views: 2501

Re: Camar cabinet hanging brackets

David, Here was my approach when I did use the Camar hangers:

viewtopic.php?f=3&t=12208

Did work, but was a little finicky. May be just as easy to do it with PE cuts.
by Nat Wheatley
Tue, Mar 12 2013, 7:18AM
Forum: eCabinet Systems Software
Topic: Corner Cabinet Issues
Replies: 1
Views: 1096

Re: Corner Cabinet Issues

Thermwood?
by Nat Wheatley
Thu, Mar 07 2013, 4:06PM
Forum: eCabinet Systems Software
Topic: Corner Cabinet Issues
Replies: 1
Views: 1096

Corner Cabinet Issues

On the attached cabinet, the front row of shelf holes are 3/4" further in from the front edge, then their entered value. I can 'cheat' them to the correct spot, but it then throw off the corresponding holes on each of the backs. Is this just an error, I've never known why it would do this. Also...
by Nat Wheatley
Sat, Jan 05 2013, 7:44AM
Forum: eCabinet Systems Software
Topic: Program Very Slow
Replies: 2
Views: 1364

Re: Program Very Slow

Hi, I just tried a sample batch of one item, and it took only a second or two for the item name change to register, so it does seem to be related, on some level, to the number of items in the batch. I've also noticed that it takes quite for this file to open on my computer. The file is too large to ...
by Nat Wheatley
Fri, Jan 04 2013, 4:38PM
Forum: eCabinet Systems Software
Topic: Program Very Slow
Replies: 2
Views: 1364

Program Very Slow

I was entering a batch of cabinets today, and things seemed to be moving very slowly. Even changing the names of batch items was taking far too long to register (30 seconds). Saving files, creating .TWD files, and some of the other processes seemed on par with what I'm used to, but others were extre...
by Nat Wheatley
Tue, Dec 18 2012, 9:57PM
Forum: eCabinet Systems Software
Topic: Closet suspension rails
Replies: 2
Views: 3553

Re: Closet suspension rails

Sent this info in a PM, but thought that I'd post here as well: Here are the item numbers for the Hafele hanging rail and brackets that I use. Both the rail and brackets come also have plastic covers (separate product numbers): 290.11.901 Hanging Rail 290.02.711 Left Bracket 290.02.710 Right Bracket...
by Nat Wheatley
Fri, May 18 2012, 3:20PM
Forum: eCabinet Systems Software
Topic: Too Many Shelf Holes
Replies: 7
Views: 3098

Re: Too Many Shelf Holes

Brad,

No problem, same here!

Nat
by Nat Wheatley
Fri, May 18 2012, 9:25AM
Forum: eCabinet Systems Software
Topic: Too Many Shelf Holes
Replies: 7
Views: 3098

Re: Too Many Shelf Holes

See first line from my last post.
by Nat Wheatley
Fri, May 18 2012, 9:09AM
Forum: eCabinet Systems Software
Topic: Too Many Shelf Holes
Replies: 7
Views: 3098

Re: Too Many Shelf Holes

The holes were added with the top (purple) adjustable shelf.

When it was cutting the file for the front row of holes, it appeared to drill every other hole, then go back over that same area and drill a full row of holes.
by Nat Wheatley
Thu, May 17 2012, 4:46PM
Forum: eCabinet Systems Software
Topic: Too Many Shelf Holes
Replies: 7
Views: 3098

Too Many Shelf Holes

A number of the shelf holes are duplicated on this cabinet. Some of the drawer slide holes do fall on the shelf holes, which may or may not be contributing to the problem.

1.hsf
(1.81 MiB) Downloaded 192 times
by Nat Wheatley
Mon, Apr 30 2012, 10:28AM
Forum: eCabinet Systems Software
Topic: Hardware Hole Editor
Replies: 3
Views: 1613

Re: Hardware Hole Editor

I do know that I tried to save a file that I had edited, and the changes didn't take. I tried it again yesterday, and the changes did take...
I'll take a closer look when I have some time.
by Nat Wheatley
Sat, Apr 28 2012, 6:41PM
Forum: eCabinet Systems Software
Topic: Hardware Hole Editor
Replies: 3
Views: 1613

Hardware Hole Editor

Am I doing something wrong, or do you still need to save hardware hole files under a new name for changes to be saved?
by Nat Wheatley
Fri, Feb 10 2012, 8:52AM
Forum: eCabinet Systems Software
Topic: Question on Corner Cabinets
Replies: 5
Views: 3427

Re: Question on Corner Cabinets

Thanks guys, count me in as a squeaky wheel. I don't use this cabinet often, and each time I do I forget that it adds the depth to the sides. I only caught it by chance yesterday, just before I sent the file to the machine, while I was checking something else. It doesn't make sense that the default ...
by Nat Wheatley
Thu, Feb 09 2012, 5:59PM
Forum: eCabinet Systems Software
Topic: Question on Corner Cabinets
Replies: 5
Views: 3427

Question on Corner Cabinets

I should know this by now, but don't. Why is it that when you take a standard corner cabinet, change the front to angled, that the depth of the sides increase by the material thickness? I had thought I remembered it had something to do with adding material so that the front edges could be trimmed at...
by Nat Wheatley
Sat, Feb 04 2012, 6:40PM
Forum: eCabinet Systems Software
Topic: Door Materials
Replies: 14
Views: 7988

Re: Door Materials

Tired Beta 2, and still nothing. It works fine for the other parts of the cabinet, not the fixed or adjustable shelves.

Go to advanced search