Search found 61 matches

by Jim Carter
Sat, Mar 03 2012, 1:21PM
Forum: Thermwood 3-Axis Machinery
Topic: Aerotech dust free
Replies: 9
Views: 2525

Re: Aerotech dust free

Will: Thats true problems of today will be gone ( one way or the other ) tomorow. :wink: Using the up spiral would certainly take care of the dust problem and would be running cooler also. I worried about parts moving and quality. but worth a try. Are your parts ready for the edge bander, do you get...
by Jim Carter
Fri, Mar 02 2012, 4:17PM
Forum: Thermwood 3-Axis Machinery
Topic: Aerotech dust free
Replies: 9
Views: 2525

Re: Aerotech dust free

I am looking for better ways to get rid of the dust, air born and heavier chips, and the dust/chips that packs in the kerf with a compresion bit. Scratch out the kerfs and vacuum is good but is not quick and then I have to clean and empty the filters and then I have to blow off the table any way. Bl...
by Jim Carter
Mon, Feb 27 2012, 9:36PM
Forum: Thermwood 3-Axis Machinery
Topic: Aerotech dust free
Replies: 9
Views: 2525

Aerotech dust free

Has any one tried the aerotech dust free routing ?
Any one have anhy thoughts on this tool
www.dustfreenesting.com
by Jim Carter
Wed, Jul 20 2011, 8:21PM
Forum: Lounge
Topic: Employment opportunity
Replies: 2
Views: 2073

Employment opportunity

I am looking for a cabinet maker/wood worker who is Proficient with e-cabinets and Master Cam soft ware.
Must be able to commute to RIver Dale New Jersey.
973-224-0221
Jim Carter
by Jim Carter
Fri, Apr 29 2011, 7:18AM
Forum: Thermwood 3-Axis Machinery
Topic: template to dxf ?
Replies: 5
Views: 1340

Re: template to dxf ?

Thanks Neville and Dennis:
good information.
I ended up making a a grid on the template, then measuring points every 1/2 inch to assign a X Y value on a spread sheet.
An associate will create an auto cad drawing file from the points.
I have not seen the resault yet, fingers crossed.
Jim
by Jim Carter
Fri, Apr 22 2011, 12:33PM
Forum: Thermwood 3-Axis Machinery
Topic: template to dxf ?
Replies: 5
Views: 1340

template to dxf ?

what would be some methods of turning a physical template (of irregular shape) into a CAD system to get usable geom. for importing into e-cabinets so i can use the profile modeler to make crown molding fit that irregular shape.
thanks for help
Jim
by Jim Carter
Fri, Apr 22 2011, 7:25AM
Forum: Thermwood 3-Axis Machinery
Topic: which software
Replies: 9
Views: 2222

Re: which software

I am inclined to keep every thing from Themwood. The support on Router, Bander, and E-cabinets has been exceptional,
by Jim Carter
Wed, Apr 20 2011, 2:59PM
Forum: eCabinet Systems Software
Topic: closed contour ?
Replies: 6
Views: 954

Re: closed contour ?

thanks Kerry and Josh
the frustrating part is not knowing what is wrong. The same file I posted I tried to extend/ trim all the lines and arcs before and after I posted. it worked for Kerry but still would not work for me.
Who ever said ignorance is bliss was ignorant. :lol:
by Jim Carter
Wed, Apr 20 2011, 11:11AM
Forum: eCabinet Systems Software
Topic: closed contour ?
Replies: 6
Views: 954

Re: closed contour ?

Thanks Josh ithought of that too. I extended the existing lines, and erased every thing inside windows. then trimed again, and same error. I tried to create parft using closed contour on simple square shape and it worked fine. just a minute ago I erasaed all the striaght lines and redrew snapping to...
by Jim Carter
Wed, Apr 20 2011, 10:02AM
Forum: Thermwood 3-Axis Machinery
Topic: which software
Replies: 9
Views: 2222

Re: which software

thanks for input.
its not so much the money as the time.
I would rather take the time to learn one soft ware package that will meet all my needs rather then learn one that will fall short.
by Jim Carter
Wed, Apr 20 2011, 9:53AM
Forum: eCabinet Systems Software
Topic: closed contour ?
Replies: 6
Views: 954

Re: closed contour ?

thanks Kerry: I have trim/esxtended every line/arc too many times to count. I have trimed/extend using one entity and two entity. I have tried to off set the lines 1/4 inch and trim/extend, I have tried to move the whole pattern 1/4", I have tried to redraw, always the same error message. "...
by Jim Carter
Tue, Apr 19 2011, 5:58PM
Forum: eCabinet Systems Software
Topic: closed contour ?
Replies: 6
Views: 954

closed contour ?

Would some one take a look at this file tell me why I can-not cut part using closed contour.
Every time I get my hopes up of getting a simple task done in a timely fasion, I am reminded of the almighty's since of humor. :joker:
by Jim Carter
Tue, Apr 19 2011, 2:26PM
Forum: Thermwood 3-Axis Machinery
Topic: which software
Replies: 9
Views: 2222

which software

I am almost ready to make the next step. I have become good profiecient at e-cabinets for cabinets and simple shapes. I would like to do more.... scale and convert dwg / dxf files into workable files either for e-cabinets or the thermwood controler, scale and convert other drawing files, such as pdf...
by Jim Carter
Sun, Mar 20 2011, 3:58PM
Forum: Thermwood 3-Axis Machinery
Topic: setting material thinckness
Replies: 3
Views: 908

Re: setting material thinckness

Do any of you measure material thickness when it is delivered and then keep a log or track material that is being used for certain job?
by Jim Carter
Wed, Mar 16 2011, 7:31PM
Forum: Thermwood 3-Axis Machinery
Topic: setting material thinckness
Replies: 3
Views: 908

setting material thinckness

Now i set my material thickness for cabinets when I write twd file in e-cabinets. I physically measure the material as I am creating the file. no problem because I am in same room as router and controler. If I wanted to write the twd file at a different location, (for example at home) how would I ch...

Go to advanced search