Search found 134 matches

by Zach Froble
Fri, Sep 18 2009, 6:32PM
Forum: eCabinet Systems Software
Topic: Face Frames
Replies: 4
Views: 649

Re: Face Frames

Randy,

There are two options I believe:

1. You have to change the sizes in the construction settings before you add them

2. If you have already added them you have to select them by clicking on them and then change them in the constructions settings.


Zach
by Zach Froble
Thu, Sep 03 2009, 1:59PM
Forum: eCabinet Systems Software
Topic: Printing Problem
Replies: 10
Views: 1160

Re: Printing Problem

Scott,

That solved the problem. Thanks everyone for the help.

Zach
by Zach Froble
Thu, Sep 03 2009, 9:32AM
Forum: eCabinet Systems Software
Topic: Printing Problem
Replies: 10
Views: 1160

Re: Printing Problem

Dan,

I tried clicking on print setup while in the line drawing editor, but nothing comes up on the screen.

Zach
by Zach Froble
Wed, Sep 02 2009, 12:43PM
Forum: eCabinet Systems Software
Topic: Printing Problem
Replies: 10
Views: 1160

Re: Printing Problem

I can print from the buy list and cut list, but I am still getting the same message when I open up the LDE. It is still telling me to check the print setup, but when I click on print set up nothing happens.

I am still using XP.

Thanks,
Zach
by Zach Froble
Tue, Sep 01 2009, 4:56PM
Forum: eCabinet Systems Software
Topic: Printing Problem
Replies: 10
Views: 1160

Re: Printing Problem

I tried restarting and the installed the latest drivers. The funny thing it was working fine and is still working fine with other applications. It is only Ecab that is giving me the problem.

Any other suggestions.

Thanks,
Zach
by Zach Froble
Mon, Aug 31 2009, 1:18PM
Forum: eCabinet Systems Software
Topic: Printing Problem
Replies: 10
Views: 1160

Printing Problem

I had a problem with our printer last week and had to reinstall it. Now when I go into the line drawing editor it gives me a message to make sure the printer setup is correct. I went to the file menu and clicked print setup but nothing came up. I tried printing but nothing is working. I can print fr...
by Zach Froble
Thu, Aug 20 2009, 1:29PM
Forum: Thermwood 3-Axis Machinery
Topic: tool man print out
Replies: 3
Views: 717

Re: tool man print out

Ryan,

Thanks for the reply. I will give that a shot, but I am thinking that making a Excel file with all the tools even if I have to write them down and bring them in the office. Taking a screen shot of all 40 tools would take some time.

Zach
by Zach Froble
Thu, Aug 20 2009, 11:33AM
Forum: Thermwood 3-Axis Machinery
Topic: tool man print out
Replies: 3
Views: 717

tool man print out

Is there a way to print my list of tooling from the tool manager? Whenever I am in the office or at home on my laptop it would be nice to have my list of tools and their settings for making dxf files.

Thanks,

Zach
by Zach Froble
Thu, Jun 04 2009, 10:07AM
Forum: Thermwood 3-Axis Machinery
Topic: Machining honeycomb core panels
Replies: 1
Views: 610

Re: Machining honeycomb core panels

Dan, I machined some honeycomb a couple years ago that was 3.5" thick. It had 1/2" thick plywood for the skins. I purchased a 1/2" bit with 4" cutting length from a local supplier. I cut in two passes (about 1/2 way for each pass if I remember straight. It cut fine but was very l...
by Zach Froble
Wed, May 27 2009, 4:26PM
Forum: Thermwood 3-Axis Machinery
Topic: Cad drawings of machine
Replies: 3
Views: 2509

Re: Cad drawings of machine

Ryan,

Thanks for the drawings they made it easier to adjust the position of the machine with the conveyors so I could get an exact layout.

Zach
by Zach Froble
Tue, May 26 2009, 3:47PM
Forum: Thermwood 3-Axis Machinery
Topic: Cad drawings of machine
Replies: 3
Views: 2509

Cad drawings of machine

Thermwood,

Do you have any dxf drawings for a C40 4x8 machine. We are reorganizing and laying out our shop for better efficiency. I saw the dimensional drawings on the site, I was looking for a scaled drawing that I can drag around to find the best fit.

Zach
by Zach Froble
Sat, Mar 14 2009, 5:39PM
Forum: Thermwood 3-Axis Machinery
Topic: 3cm Solid Surface Material
Replies: 8
Views: 1891

Re: 3cm Solid Surface Material

Kieth, I just tried a 3/8 2-flute rougher/finisher bit with chipbreakers. I ran it at 18000 rpm and about 200ipm in three step passes of approximately .4 each pass. The cut quality was pretty good. We had a small seam that all we did was sanded a little with a block and glued. No matter what bit I h...
by Zach Froble
Fri, Mar 06 2009, 4:06PM
Forum: Thermwood 3-Axis Machinery
Topic: 3cm Solid Surface Material
Replies: 8
Views: 1891

Re: 3cm Solid Surface Material

We have been cutting the 3cm Affinity and EOS brand solid surfaces with and 3/8 Onsrud spiral O-flute bit. I would estimate that we get between 15-20 sheets per bit at about 150in/min. I was checking on The Fabrication Network forum and these guys were talking about cutting the 3cm with a bit Pinske...
by Zach Froble
Wed, Jan 28 2009, 10:54PM
Forum: Thermwood 3-Axis Machinery
Topic: One Part, More than one Edgebanding, Slab Doors too
Replies: 7
Views: 1300

Re: One Part, More than one Edgebanding, Slab Doors too

I am cutting a job right now with slab doors and the labels have no picture.

I would also like to see different EB materials on the same label.

Zach
by Zach Froble
Fri, Jan 23 2009, 5:20PM
Forum: Customer Tools
Topic: Bar Rail
Replies: 7
Views: 6629

Re: Bar Rail

Kerry and Brian,

I checked the dxf file and it seems to be all arches and straight lines. I posted the dxf in the ecabinets forum if you want to take a look at it.

Zach

Go to advanced search