Search found 696 matches

by Scott Marshburn
Fri, Apr 06 2012, 4:52AM
Forum: eCabinet Systems Software
Topic: Problem With drawer box desighner?
Replies: 7
Views: 2077

Re: Problem With drawer box desighner?

Kerry When you set the bottom front to a negitive inset with a full dado for the bottom the result is the drawer in the attached file
by Scott Marshburn
Thu, Apr 05 2012, 4:54PM
Forum: eCabinet Systems Software
Topic: Problem With drawer box desighner?
Replies: 7
Views: 2077

Re: Problem With drawer box desighner?

Kerry Did you make a dwar box as described in my post? All of the sholder settings are set to 0" But when you set the front insets to -3/8 and the bottom front inset to -3/4 with a full dado set for bottom the back of the bottom looks like it extents by the same amount less the thickness of the...
by Scott Marshburn
Thu, Apr 05 2012, 5:34AM
Forum: eCabinet Systems Software
Topic: Problem With drawer box desighner?
Replies: 7
Views: 2077

Problem With drawer box desighner?

Go to drawer box designer take a standard drawer box with a 1/4 bottom. Remove the front Left and right sides are butt joints to the back all insets are 0" Inset Bottom 3/4" Left and right sides flush Bottom Settings: Back bottom flush ,Front front flush. Left and right full dado. Dado dep...
by Scott Marshburn
Mon, Apr 02 2012, 4:42PM
Forum: eCabinet Systems Software
Topic: Problem with shape manager?
Replies: 3
Views: 776

Re: Problem with shape manager?

Thanks Kerry and Scott for your help once again. I sure am glad that I don’t have to use all of those line segments to cut these parts after all. It really slows down my computer and takes for ever to wright the code at the machine.
by Scott Marshburn
Mon, Apr 02 2012, 5:18AM
Forum: eCabinet Systems Software
Topic: Problem with shape manager?
Replies: 3
Views: 776

Problem with shape manager?

In shape manager draw a 3 point arc at 0,0_ 20 3/8,11/16_ 40 3/4,0
I get a straight line no arch.
Also get the same result when importing as dxf from draft sight
I can get the geometry that I am after by importing from sketchup but every thing is line segments
by Scott Marshburn
Fri, Mar 30 2012, 6:27PM
Forum: eCabinet Systems Software
Topic: Help With part editor cuts on deck
Replies: 3
Views: 876

Re: Help With part editor cuts on deck

Thanks Rick for the promp responce .I will make sure to make a note of that
by Scott Marshburn
Fri, Mar 30 2012, 5:28PM
Forum: eCabinet Systems Software
Topic: Help With part editor cuts on deck
Replies: 3
Views: 876

Help With part editor cuts on deck

Take this cabinet to stretcher editor and adjust any stretcher then return to main and see what happens to the deck.
by Scott Marshburn
Tue, Mar 27 2012, 5:18PM
Forum: eCabinet Systems Software
Topic: Help With Constraints
Replies: 4
Views: 1464

Re: Help With Constraints

Thanks Kerry for your response but I may have to start from scratch on this one. Try taking it from 14 1/2W to 32W That won't work. Maybe some one out there has done this type of door before? I sure could use some help on this.
by Scott Marshburn
Mon, Mar 26 2012, 6:06AM
Forum: eCabinet Systems Software
Topic: Help With Constraints
Replies: 4
Views: 1464

Re: Help With Constraints

Sorry The file did no attach
by Scott Marshburn
Mon, Mar 26 2012, 6:00AM
Forum: eCabinet Systems Software
Topic: Help With Constraints
Replies: 4
Views: 1464

Help With Constraints

Would someone be kind enough to look at this door and help me with the constraints. I am able to constrain the arcs to resize like I wish when the width changes but now the height of the door won't resize at all. Thanks for any help.
by Scott Marshburn
Sat, Mar 24 2012, 1:13PM
Forum: eCabinet Systems Software
Topic: Constraint Manager Question
Replies: 1
Views: 596

Constraint Manager Question

This is probably a $25 question but what are the Circular Quadrant nodes in constraint manager used for?
by Scott Marshburn
Sun, Mar 11 2012, 7:51PM
Forum: eCabinet Systems Software
Topic: how To Scale/Move Rectangles/Circles in Part Editor?
Replies: 27
Views: 6698

Re: how To Scale/Move Rectangles/Circles in Part Editor?

Tom: Welcome to the world of custom cabinets and furniture Ecabinets and other cad programs are only a tool although valuable tools in this industry. I can remember setting down with my dad and drafting by hand (graft paper rulers etc.)for not just 2 or three hours but some times 2 or three days.and...
by Scott Marshburn
Sat, Mar 10 2012, 2:32PM
Forum: eCabinet Systems Software
Topic: DXF File in Contour Mode in PE Loading Wrong
Replies: 6
Views: 1924

Re: DXF File in Contour Mode in PE Loading Wrong

Tom: I can reproduce something similar to what you are getting by drawing a shape on the wrong plane and exporting it as a polyface mesh. I am not sure if this is your problem but the program I use I export lines only no faces.
by Scott Marshburn
Sat, Mar 10 2012, 1:53PM
Forum: eCabinet Systems Software
Topic: DXF File in Contour Mode in PE Loading Wrong
Replies: 6
Views: 1924

Re: DXF File in Contour Mode in PE Loading Wrong

Tom: You probably already know this but Make sure you are drawing the Geometry That you are exporting into Ecab. On the same plane as X and Y on the part editor screen. Looking straight down on the Z axes, Y runs top to bottom on the screen and X runs left to right. Make sure that the geometry is 2d...
by Scott Marshburn
Sat, Mar 10 2012, 12:22PM
Forum: eCabinet Systems Software
Topic: how To Scale/Move Rectangles/Circles in Part Editor?
Replies: 27
Views: 6698

Re: how To Scale/Move Rectangles/Circles in Part Editor?

Tom: What program are you using? Can you post the file you are trying to import?

Go to advanced search