Search found 694 matches

by Scott Marshburn
Fri, Mar 09 2012, 6:03AM
Forum: eCabinet Systems Software
Topic: how To Scale/Move Rectangles/Circles in Part Editor?
Replies: 27
Views: 6406

Re: how To Scale/Move Rectangles/Circles in Part Editor?

Someone correct me if I am wrong, but doesn't part editor have offset , mirror and move/copy tools that can be used to do what Tom is describing? Although Kerry's method is the method of choice for me.
by Scott Marshburn
Sat, Feb 04 2012, 11:24AM
Forum: Thermwood 3-Axis Machinery
Topic: End mill cutter for metal on solid wood
Replies: 2
Views: 831

Re: End mill cutter for metal on solid wood

Thanks Josh: I will give that a try. I found some flat bottom spiral cutters on MLCS web site. We have some straight 2 flute carbide tipped cutters on hand but there is a space on the bottom between the tips. I will have to try one and see if they leave marks too. Before purchasing one.
by Scott Marshburn
Sat, Feb 04 2012, 9:28AM
Forum: Thermwood 3-Axis Machinery
Topic: End mill cutter for metal on solid wood
Replies: 2
Views: 831

End mill cutter for metal on solid wood

I was wandering if anyone was using a end mill cutter for metal on solid wood. We have some molding to run that have some flat faces and our standard spiral cutters are leaving lines from the sharp points on the ends. The only end mills I can locate are for metal.
by Scott Marshburn
Sun, Jan 29 2012, 10:10AM
Forum: eCabinet Systems Software
Topic: Bookcase for hidden passage
Replies: 1
Views: 810

Bookcase for hidden passage

We have a customer that wants a bookcase that will open into a passageway has anyone ever built one if so what type of hardware is best? It will be for a opening approx.. 55" wide. The unit needs to be 14 inches deep. My biggest concern is sagging. They were also asking about a automated openin...
by Scott Marshburn
Sat, Dec 24 2011, 4:50PM
Forum: Thermwood 3-Axis Machinery
Topic: Is youbuild.com going to be like production sharing???
Replies: 47
Views: 13424

Re: Is youbuild.com going to be like production sharing???

My Question is.Has any other Beta testers recieved this new release yet or is CFP now the official tester?I choose to have a postive outlook on this but it just would not be right if THM and ECAB is holding out on this new jonery until CFP and Home Depo has cornered the market.
by Scott Marshburn
Wed, Nov 30 2011, 6:38PM
Forum: Thermwood 3-Axis Machinery
Topic: using the mdf door option in controle nesting
Replies: 1
Views: 745

using the mdf door option in controle nesting

We have some doors that we would like to make a simple centerline profile with a custom cutter 1/4 ballnose to be exact. The door and the geomentry was created from a back. I have never used the mdf door feature in controle nesting before I need to nest these doors with the rest of the job as they w...
by Scott Marshburn
Sun, Oct 16 2011, 7:00PM
Forum: Thermwood 3-Axis Machinery
Topic: Tool change issues
Replies: 10
Views: 2594

Re: Tool change issues

Jason I have this issue before when it was cold at night then the next morning it would do this and also some times when multable machines that used the same air compresser were in use. The fix was to warm up the head for about 30 min if the cold temp was a factor and to shut air off to unnesseary m...
by Scott Marshburn
Wed, Sep 07 2011, 5:22PM
Forum: eCabinet Systems Software
Topic: post form tops
Replies: 3
Views: 1153

Re: post form tops

Ok I see that you all are cutting counter tops on the router but how do you hold them down and what lingth cutters are you using most of our post form tops come with a 3.5 to 4in. back splash. Also what about the grooves for the draw bolts in the mighterd cuts? I understand the need for the dxf file...
by Scott Marshburn
Fri, Sep 02 2011, 5:33PM
Forum: eCabinet Systems Software
Topic: post form tops
Replies: 3
Views: 1153

post form tops

Hase or does any one use there router to cut post form tops example 45 deg. angles sink cut outs etc.
by Scott Marshburn
Sun, Aug 28 2011, 9:37AM
Forum: eCabinet Systems Software
Topic: Problem Profiling!!!!
Replies: 33
Views: 7699

Re: Problem Profiling!!!!

Kerry I was able to apply the cutter you posted by removing all of the fillets (all corners where 90 deg.) Although I had to recreate the part.It seams that the problem may have something to do with the fillets or arcs.When I apply fillets to the inside corners the software crashes.When I apply fill...
by Scott Marshburn
Mon, Aug 22 2011, 5:44PM
Forum: Thermwood 3-Axis Machinery
Topic: new feature request
Replies: 4
Views: 1319

Re: new feature request

Bryan That is not actulay what I am talking about not to say that that would not be a benifit but the reason for the cut direction that I am talking about is for a climb cut on tool group 1 witch consist of for example solid material and/or mdf, partical board etc. So that the cut direction would no...
by Scott Marshburn
Sat, Aug 20 2011, 10:00AM
Forum: Thermwood 3-Axis Machinery
Topic: new feature request
Replies: 4
Views: 1319

new feature request

1.Would it be possable to have a feature in the flip op first to nest or group as many flip ops as possable together per sheet. 2.Would it be possable to put the double pass option in the tool groups area for example no double pass for 1/4 material tool group and a double pass for 3/4 material tool ...
by Scott Marshburn
Wed, Aug 17 2011, 5:24AM
Forum: Thermwood 3-Axis Machinery
Topic: Allegies to dust
Replies: 3
Views: 1037

Re: Allegies to dust

Neville I don't know if this will work for you but we made a booth for sanding.It has 3 sides the back wall has a back ,front and a top kind of like a closit the front has several 20"X20" sections for spray booth intake filters the fans are mounted in the top. and just vent back into the s...
by Scott Marshburn
Sat, Aug 13 2011, 5:45AM
Forum: eCabinet Systems Software
Topic: Snap markers
Replies: 1
Views: 565

Snap markers

I was looking in the show hide area in custom layout and see a option to show or hide snap markers but can not find where they are to use them. I looked in wall items but not there is this a feature that is no longer?
by Scott Marshburn
Thu, Aug 11 2011, 5:27PM
Forum: eCabinet Systems Software
Topic: Importing dxf's
Replies: 1
Views: 652

Re: Importing dxf's

Hi John I dont have any experance with turbocad but I have 1 guestion that is are you wanting to import a dxf file from turbocad into ecab? If so you should be able do do this in shape maninager and or part editor depinding on what you are wanting to creat( a tool or a part). If you are wanting to s...

Go to advanced search