Search found 675 matches

by Scott Marshburn
Sat, Dec 19 2015, 4:31PM
Forum: eCabinet Systems Software
Topic: Working with eCabinets cut list in excel
Replies: 36
Views: 15473

Re: Working with eCabinets cut list in excel

Hi everyone. This is part 1 on formatting ecabinets Five Piece Door Break down using excel. Here is the link to check it out. https://www.youtube.com/watch?v=vRW0xqR1L3s&index=1&list=PLsajY4bbxhrCKfcrq6PtA5gA2cYsbVtvA It has been quite of a learning experience for me so I hope that some of y...
by Scott Marshburn
Sat, Dec 19 2015, 2:36PM
Forum: eCabinet Systems Software
Topic: Install window or cut opening then install window?
Replies: 3
Views: 2155

Re: Install window or cut opening then install window?

Hi carmen. It is mainly presentation. The first screen shot shows 3 windows. All with no cut outs. The third window has an image applied to it. You can use custom images of your own. The second screen shot is with cut outs along with some lights. Notice the lights behind the wall and how they shine ...
by Scott Marshburn
Sat, Dec 19 2015, 4:06AM
Forum: eCabinet Systems Software
Topic: Can't put a profile on bottom eadge of display board
Replies: 9
Views: 3448

Re: Can't put a profile on bottom eadge of display board

Tony. I downloaded the cutters that you posted. I got the same results that you were getting. I noticed that cutter A had a slight flat on the bead (See the original cutter screen shot below).As if you may have used the fillet tool to create it. This is common with using fillets. So I redrew both cu...
by Scott Marshburn
Fri, Dec 18 2015, 6:19AM
Forum: eCabinet Systems Software
Topic: Can't put a profile on bottom eadge of display board
Replies: 9
Views: 3448

Re: Can't put a profile on bottom eadge of display board

I cannot seem to reproduce this error with the cutters that I am using. Everything works fine for me using the settings in your screen shots. I am however running a Beta version. Could you post the .Tol files of the cutters that you are using? If you rather you can Pm me with the files or email them...
by Scott Marshburn
Thu, Dec 17 2015, 6:46AM
Forum: eCabinet Systems Software
Topic: Can't put a profile on bottom eadge of display board
Replies: 9
Views: 3448

Re: Can't put a profile on bottom eadge of display board

If you draw the cutter as per the pic below and set the diameter to be the distance between the beads for example the cutter that I made the diameter was ¼. You can use the radius comp feature. On the bottom click on the right bottom corner. The red dot should be on the left. In the radius comp sect...
by Scott Marshburn
Tue, Dec 15 2015, 5:43PM
Forum: eCabinet Systems Software
Topic: snap resolution
Replies: 3
Views: 2203

Re: snap resolution

Hi Ralph. You can hide the doors and/or any other part by clicking on part then select the parts to hide. After you have selected the parts Right click and select hide. You can unhide them after you are finished. Just right click and select show hidden items. As for the decimals. You can change the ...
by Scott Marshburn
Sun, Dec 13 2015, 8:06AM
Forum: eCabinet Systems Software
Topic: Phantom circles on corner units
Replies: 7
Views: 3155

Re: Phantom circles on corner units

Well I guess that those gremlins have got me also. I get the same thing with a standard framed corner. However when I lode a corner cabinet from my library that has been modified they are not there.
by Scott Marshburn
Sat, Dec 12 2015, 4:37PM
Forum: eCabinet Systems Software
Topic: Working with eCabinets cut list in excel
Replies: 36
Views: 15473

Re: Working with eCabinets cut list in excel

Formatting eCabinets Five Piece Door Break down with excel vba. This is a quick overview for the series that I am starting on how you can modify the five piece door break down worksheet that eCabinets generates when you export there cut list into excel.Check it out at this link https://www.youtube.c...
by Scott Marshburn
Sat, Dec 12 2015, 1:01PM
Forum: eCabinet Systems Software
Topic: Phantom circles on corner units
Replies: 7
Views: 3155

Re: Phantom circles on corner units

What you have done is captured a photo of those little gremlin things that hide your ruler and tape after you have left work for the day.
by Scott Marshburn
Sun, Dec 06 2015, 4:44PM
Forum: eCabinet Systems Software
Topic: Working with eCabinets cut list in excel
Replies: 36
Views: 15473

Re: Working with eCabinets cut list in excel

Convert numbers stored as text with excel vba Part2 In this video I will show you how to add some code to the import selected user form that will automatically convert all of the numbers that are stored as text to numbers in the eCabinets excel worksheets when you import them into a master workbook....
by Scott Marshburn
Sun, Nov 29 2015, 10:43AM
Forum: eCabinet Systems Software
Topic: Working with eCabinets cut list in excel
Replies: 36
Views: 15473

Re: Working with eCabinets cut list in excel

Convert numbers stored as text in your cut list with excel vba Part1 In this video I will show you how to add some code to the import selected user form that will automatically remove all of the inch symbols from the eCabinets excel worksheets when you import them into the master workbook that I am ...
by Scott Marshburn
Mon, Nov 23 2015, 4:51PM
Forum: eCabinet Systems Software
Topic: cabinet part list into excel
Replies: 8
Views: 3869

Re: cabinet part list into excel

Hi Chris. Glad to see that you are coming along well. The reason that you have to keep opening the saved job to execute the macros is probably because these macros where stored in the saved workbook. Generally when recording macros I store them in my personal workbook. If you would like to send me b...
by Scott Marshburn
Fri, Nov 20 2015, 5:24AM
Forum: eCabinet Systems Software
Topic: cabinet part list into excel
Replies: 8
Views: 3869

Re: cabinet part list into excel

Thats fine i can see on his version of excel there are tabs to choose from, on my version there isnt any tabs so i cant go to sheet components as he is instruction to do. Try going to Options click on advanced then scroll down to Display options for this workbook. Make sure that you have show sheet...
by Scott Marshburn
Wed, Nov 11 2015, 9:42AM
Forum: Thermwood 3-Axis Machinery
Topic: Profile modeler tool group
Replies: 5
Views: 3074

Re: Profile modeler tool group

Hi Jeremy I did something similar also. I contacted THM and they emailed me a file with instructions.

Go to advanced search