Search found 72 matches

by Daren LaBranche
Thu, Apr 30 2015, 12:19PM
Forum: eCabinet Systems Software
Topic: Grain Match on multiple adjacent cabinets?
Replies: 18
Views: 28431

Re: Grain Match on multiple adjacent cabinets?

I was wondering if there's been any development on this since the last post? Is it now possible to grain match nest multiple cabinets of a job?

Thanks
by Daren LaBranche
Fri, Nov 09 2012, 8:23PM
Forum: eCabinet Systems Software
Topic: Blind Dado Tenon Placement Question
Replies: 1
Views: 3236

Re: Blind Dado Tenon Placement Question

Well, it looks like I've answered my own question. Unless anyone sees anything wrong with doing it this way, here's what I did. Extend the tenons on both sides of the panel (or inversely, extend the tenons on the top & bottom) by entering a negative value the same length as the dado depth. Leave the ...
by Daren LaBranche
Fri, Nov 09 2012, 8:06PM
Forum: eCabinet Systems Software
Topic: Blind Dado Tenon Placement Question
Replies: 1
Views: 3236

Blind Dado Tenon Placement Question

Does anyone know how to make a blind dado tenon go to the end of a part without having a notch at the corner? If you look at this back panel you can see that the tenon on the top left corner extends through to the end of the panel the way I want it to (only because I've setup that end as a butt ...
by Daren LaBranche
Mon, Nov 05 2012, 11:37AM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 49461

Re: Feature Requests

I see your point Kerry, but I still agree with Gerry. Your comment "The list idea comes up quite often" should indicate that this is something needed.

I see this discussion about 2 things; 1) An organized & updated list of requests & upcoming features, and 2) A way to help Thermwood measure which ...
by Daren LaBranche
Sun, Nov 04 2012, 3:25PM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 49461

Re: Feature Requests

Sounds like an excellent idea to me Gerry.
by Daren LaBranche
Sat, Nov 03 2012, 5:27PM
Forum: eCabinet Systems Software
Topic: ShopBot Link Feature Requests
Replies: 3
Views: 6084

Re: ShopBot Link Feature Requests

I always appreciate your feedback Gary, even if I don't always understand or agree with it. Thank you for taking the time. I hope that my many comments and questions are taken in the spirit with which they are intended - i.e. constructive feedback that is hopefully appreciated & seriously considered ...
by Daren LaBranche
Sat, Nov 03 2012, 1:44PM
Forum: eCabinet Systems Software
Topic: New release for ecabs now available
Replies: 2
Views: 3292

Re: New release for ecabs now available

Can someone please explain to me what this statement on the download page means? Expire?

"Version 6 Build 7 & 8 will EXPIRE 12/1/12"
by Daren LaBranche
Fri, Nov 02 2012, 4:03PM
Forum: eCabinet Systems Software
Topic: ShopBot Link Feature Requests
Replies: 3
Views: 6084

ShopBot Link Feature Requests

I didn't see a thread on this anywhere so I thought I'd start one.

Tools
1) Allow users to leave tools which we do not want to be active (available for machining) in the Operation Tools Setup list. I want to retain all the important diameter, speed & depth settings I have acquired for each tool ...
by Daren LaBranche
Mon, Oct 08 2012, 7:32PM
Forum: eCabinet Systems Software
Topic: How do YOU sync everything between computers?
Replies: 0
Views: 3360

How do YOU sync everything between computers?

If any of you use more than one PC to work on, I would be interested to hear how you are syncing ALL of your data between them.

I originally tried to sync EC between two of my PCs using Dropbox (I have successfully done this with several other apps), but found it was impossible due to the way that ...
by Daren LaBranche
Tue, Oct 02 2012, 3:49PM
Forum: eCabinet Systems Software
Topic: Cabinet Construction Questions
Replies: 2
Views: 3476

Re: Cabinet Construction Questions

Thank you Josh. I understand what you mean with the Global Settings helping a little, but it sounds like I still need to reset allot of individual Construction Settings for every cabinet I make that is different from the seed cab it started out as. You're right, it's getting faster & easier all the ...
by Daren LaBranche
Tue, Oct 02 2012, 1:47PM
Forum: eCabinet Systems Software
Topic: Cabinet Construction Questions
Replies: 2
Views: 3476

Cabinet Construction Questions

As a newbie, I'm trying to build a library of my cabinets. These may seem like rookie questions, so I hope you guys can offer me a simple solution that I'm just not familiar with yet.

Cabinet Type
If I understand what I've read correctly, I am not able to save a wall corner cabinet (that I ...
by Daren LaBranche
Tue, Oct 02 2012, 1:30PM
Forum: eCabinet Systems Software
Topic: Question about Define Hardware
Replies: 1
Views: 2703

Re: Question about Define Hardware

I agree!

I may be incorrect, but this sounds allot like the problem I was having here with user data not being respected.
http://www.thermwood.com/forums/viewtopic.php?f=3&t=13123
I'd suggest that all user-modified data be identified & separated clearly by the programmers so that, among other ...
by Daren LaBranche
Mon, Oct 01 2012, 11:00AM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 49461

Re: Feature Requests

Feature Requests Clarification
As a newbie, please forgive me if I don't understand exactly how these are being handled in this forum, but I find it difficult to find/identify which feature requests have been made, which are being considered/rejected & which are being implemented in the next ...
by Daren LaBranche
Mon, Oct 01 2012, 10:58AM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 49461

Re: Feature Requests

Applied Finished Ends
I too will be using applied panels to finish my cabinet ends, but I haven't gotten there yet. Could you please explain how best to do this? If I use a slab door as suggested by Scott, I assume I would pick a door & position it next to my cabinet in Custom Layout? How do you ...
by Daren LaBranche
Sat, Sep 29 2012, 10:17AM
Forum: eCabinet Systems Software
Topic: Feature Requests
Replies: 40
Views: 49461

Re: Feature Requests

Conestoga Door Images
Thanks for helping to clarify Kerry & Rick. However, when I changed the materials folder it affected BOTH the thumbnails in the Door Drawer Front Editor & the door on my cab in the Cabinet Editor. How do I change the image associated with a Conestoga door if I would like to ...