Search found 66 matches

by Steve Detina
Thu, Aug 06 2009, 11:07AM
Forum: eCabinet Systems Software
Topic: Machine time Available
Replies: 0
Views: 884

Machine time Available

Attention eCab users in Southern Ontario

I have machine time available on my router. If you required any machining a edgebanding please contact me steved@silhouettecustomcabinets.com
by Steve Detina
Wed, Jun 24 2009, 9:38AM
Forum: eCabinet Systems Software
Topic: Printing Labels
Replies: 5
Views: 3203

Printing Labels

Not sure if this is in the right place but a little while back the boys at thermwood changed how we print from the machine. When the change was made we lost the ability to print out just bar codes. Is there anyway we can get that back. We often print just bar code for the offalls because we do not n...
by Steve Detina
Wed, Jun 24 2009, 9:36AM
Forum: eCabinet Systems Software
Topic: Blind Corner cabinet
Replies: 1
Views: 1071

Blind Corner cabinet

Ok Guys, I think I have found a work around for blind corner cabinets in e-cab. The only problem is that the software flips the tenon on the blind side thus creating a flip operation on the machine. eg. tenon on the top side on one end of the shelf and on the bottom side on the same shelf. I have at...
by Steve Detina
Mon, Jun 08 2009, 9:55AM
Forum: Thermwood 3-Axis Machinery
Topic: Drawbar 1 Up switchnot closed
Replies: 3
Views: 1888

Drawbar 1 Up switchnot closed

Hope everyone is having a better monday then me. This morning we have been trying to make some doors on the CS40 and everything was fine when we started to get the following error. Drawbar 1 Up switch not closed 1 second after Drawbar down output turned off (Output 1 off & output 2 open) Tool ch...
by Steve Detina
Tue, May 26 2009, 8:37PM
Forum: eCabinet Systems Software
Topic: Install eCab on new laptop
Replies: 1
Views: 596

Install eCab on new laptop

I have a new reg code and have downloaded the latest build but I cannot find the original cd. Is this available over the net or do I have to order another one.

thanks in advance

steve
by Steve Detina
Tue, Sep 23 2008, 9:56AM
Forum: eCabinet Systems Software
Topic: Blind Corner Cabinet
Replies: 5
Views: 2396

Re: Blind Corner Cabinet

Justin;

If I leave .009 then the front width is .875, this creates a problem with blind corner hinges. I know that I could just take the dadoes out for that side but I would like to reduce any type of human error white trying to reproduce the tenon.

Steve
by Steve Detina
Mon, Sep 22 2008, 4:53PM
Forum: Thermwood 3-Axis Machinery
Topic: Help- Problem with CS45
Replies: 4
Views: 1980

Re: Help- Problem with CS45

Gary; Glad to hear that you are up and running again. I bought my machine from the boys and CNC Automation and I cannot say enough about the outstanding service from Andrew, Bob, Brad and all the others at CNC. I too have had issues after hours and they have bent over backwards to get us up and runn...
by Steve Detina
Mon, Sep 22 2008, 4:28PM
Forum: eCabinet Systems Software
Topic: Blind Corner Cabinet
Replies: 5
Views: 2396

Blind Corner Cabinet

OK guys, don't know what I am doing wrong but maybe someone can help. I take a standard corner cabinet and then reduce the front width to a 0.001 larger then the thickness of the material that I am using. What happens next is what is interesting. It reduces the front width but then flips the tennon ...
by Steve Detina
Wed, May 14 2008, 7:57AM
Forum: Thermwood 3-Axis Machinery
Topic: sufacing spacer board
Replies: 1
Views: 737

sufacing spacer board

Hello everyone;

We have a cabinet shop 40 with a 5 X 10 table. We are currently using 4 X 8 sheets for our spacer, my question is does anyone have a surfacing program that will just surface 4 X 8 instead of the entire 5 X 10 table.

thanks

Steve
by Steve Detina
Tue, May 13 2008, 11:32AM
Forum: eCabinet Systems Software
Topic: eCab 5.2 batch issues
Replies: 5
Views: 1700

Re: eCab 5.2 batch issues

Scott;

You are a genius, I did as you asked and everything worked fine. I took it a step further and changed material thickness as well and it did not go boom. Is this just one of those things that I am going to have to live with or is it a hate to say it a bug.

thanks for your help

Steve
by Steve Detina
Tue, May 13 2008, 9:26AM
Forum: eCabinet Systems Software
Topic: eCab 5.2 batch issues
Replies: 5
Views: 1700

Re: eCab 5.2 batch issues

Scott; Thanks for the reply. eCab does create a TWD and I have cut a couple of jobs only because I do not want to stop production. Are these files ok. I am not saving over a network, I am saving to my hard drive and then transferring the info on a memory stick to the machine. As for the PC, it is a ...
by Steve Detina
Mon, May 12 2008, 10:34AM
Forum: eCabinet Systems Software
Topic: eCab 5.2 batch issues
Replies: 5
Views: 1700

eCab 5.2 batch issues

Hey guys, First off I would like to say that I am really impressed with the new layout designer, makes things much easier. Thermwood and the programmers are doing a great job at providing us with a really good piece of software. Since I have installed the new version I have been having problems batc...
by Steve Detina
Wed, Jun 13 2007, 12:36PM
Forum: eCabinet Systems Software
Topic: Error: Tool size between 0.000 and 0.000 not setup in toolin
Replies: 3
Views: 1513

Sorry here are the files
by Steve Detina
Wed, Jun 13 2007, 12:34PM
Forum: eCabinet Systems Software
Topic: Error: Tool size between 0.000 and 0.000 not setup in toolin
Replies: 3
Views: 1513

Error: Tool size between 0.000 and 0.000 not setup in toolin

Hey guys;

I am getting this evrror when I try to nest a piece that I have created. I have not changed the material thickness, or changed material. Has anyone had this error. Attached are some of the files.
by Steve Detina
Fri, May 25 2007, 8:04AM
Forum: eCabinet Systems Software
Topic: e-Cab crashing
Replies: 10
Views: 2575

I know that you are all working hard but when do you think the next build will be out.

Go to advanced search