Search found 402 matches

by Will Williamson
Sun, Jul 14 2013, 7:50AM
Forum: Thermwood 3-Axis Machinery
Topic: Flip op miscutting
Replies: 10
Views: 3332

Re: Flip op miscutting

Yes I use the sane same fixture offset for both . I make a small cabinet 12 x 12 x 12 and use it to set up and test my results i also make my own flip op fence 24" x 72" to locate to locate full sheets and on the inside corner of the jig where the fixture offset is I locate a drill operati...
by Will Williamson
Sat, Jul 13 2013, 2:09PM
Forum: Thermwood 3-Axis Machinery
Topic: Flip op miscutting
Replies: 10
Views: 3332

Re: Flip op miscutting

This is the kind of thing that only happens on the week end.
Go in there and make the necessary .125 adjustment to the axis G52 location and give it a try .
by Will Williamson
Sun, Jul 07 2013, 11:11AM
Forum: eCabinet Systems Software
Topic: Factors affecting fit and depth clearances
Replies: 15
Views: 3472

Re: Factors affecting fit and depth clearances

Design your self a small cabinet 12" x 12" x 12" and see for your self the result of your setting changes and flip ops
by Will Williamson
Fri, Jun 14 2013, 11:34AM
Forum: Thermwood 3-Axis Machinery
Topic: Drill Bank Plunge rate
Replies: 10
Views: 5197

Re: Drill Bank Plunge rate

Have you spoke to your tooling supplier? Call Vortex 715 355 7707
by Will Williamson
Mon, May 20 2013, 1:56PM
Forum: eCabinet Systems Software
Topic: Buying a new PC
Replies: 7
Views: 2016

Re: Buying a new PC

At the encouragement of my tech support ,3 months ago I bought a used 3 year old Dell Precision Laptop on craigs list for $200 dollars duo core Win 7 64 bit good grafix card It works fantastic. I bought it for a backup it is my second one I bought like that.
by Will Williamson
Sun, May 05 2013, 9:29PM
Forum: Thermwood 3-Axis Machinery
Topic: Drag Knife
Replies: 4
Views: 2419

Re: Drag Knife

Aspire from Vectric has that ability. to write code for the drag knife I wish Thermwood would develop a relationship with this software company it is fantastic
by Will Williamson
Mon, Mar 11 2013, 4:23PM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 10523

Re: V CARVE

Jason
The post is back on page one of this Subject

Anyone know the code to slow down or control the G00 Moves mine is at 1680 IPM and it really jumps around when I am only running at 100 or 50 IPM
by Will Williamson
Sun, Mar 10 2013, 9:27AM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 10523

Re: V CARVE

The changes I made to Josh's post are. I deleted the the x shift and y shift and I changed the G901 to G52L1 I see no gain in using the G901 location. I would rather locate my part near the Home location My G52L1 is X2.Y10 that way the machine is not traveling the 10' to my G901 location every time ...
by Will Williamson
Thu, Mar 07 2013, 10:44PM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 10523

Re: V CARVE

Thanks Josh I am using most of the Post processor from you I made a few changes but it works fantastic Thanks Again
by Will Williamson
Wed, Jan 16 2013, 12:11PM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 10523

Re: V CARVE

JoshLlooks like I posted without looking at your post txt file
Thanks I am going to try it on my cs45
Thanks Will
by Will Williamson
Tue, Jan 15 2013, 9:13AM
Forum: Thermwood 3-Axis Machinery
Topic: V CARVE
Replies: 28
Views: 10523

Re: V CARVE

Just add the waste board thickness to your set spoil dimension in your m999 macro. at the same time replace the question mark after the set Z shift with your material thickness and you will no longer have to stop and restart at the beginning of every file Once you get the hang of modifying the posts...
by Will Williamson
Mon, Dec 31 2012, 1:38PM
Forum: Thermwood 3-Axis Machinery
Topic: Can someone try to model this please.
Replies: 7
Views: 2070

Re: Can someone try to model this please.

My problems with the PM always leads back to the basic dxf file that I am trying to get to profile If I draw these profiles my self, no problem. But when I use customer supplied files, I almost always have problems Start from scratch and redraw the profile and look at the resulting file sizes all th...
by Will Williamson
Sat, Nov 17 2012, 8:35AM
Forum: eCabinet Systems Software
Topic: New YouBuild Cut Center Now Open in Amarillo, Texas!
Replies: 1
Views: 908

Re: New YouBuild Cut Center Now Open in Amarillo, Texas!

Hey is this you Kerry ? Congratulations
by Will Williamson
Fri, Nov 09 2012, 8:20AM
Forum: Thermwood 3-Axis Machinery
Topic: Improve Dust Pickup CS43
Replies: 33
Views: 13389

Re: Improve Dust Pickup CS43

Sean
Send us a picture please
by Will Williamson
Thu, Nov 01 2012, 12:37PM
Forum: Thermwood 3-Axis Machinery
Topic: 901 PART LOCATOR while doing Vee Grooves
Replies: 11
Views: 3010

Re: 901 PART LOCATOR while doing Vee Grooves

Daniel Vonderheide is the number one reason for my Great satisfaction with my Thermwood Router and Thermwood Corporation period.
And I'm really glad to see Your contributions on here Brad
Thanks Will Williamson

Go to advanced search