Thermwood / eCabinet Systems

Nat,

Kerry is correct. This issue unfortunately did not make it in build 2 (but is not forgotten!). You will need to create the geometry with the fillets and then cut it for now. Sorry for the inconvenience.

Georgi, I have reproduced this issue. For some reason it is creating a really wide dado ONLY on the Right side of the drawer box (left side and all other parts are perfect). I will list this and have it resolved for the next build. However, you can get around this RIGHT NOW by simply changing the de...

Georgi,

Can you post the .hsf of the drawer box for me and maybe the job or cabinet that contains it too.

Thanks for the reply Gary. I tried changing the insets for the dados after the PE cuts and it still is working OK. Just let me know if you run across it again. Thanks for the feedback.

John, Your old reg code should work (and you may have already use it), but just in case you need it, I sent you one of your assigned reg codes that was never used. The email on record is not the one you are using here (its an @spcglobal.net account). I also reset your on-line status so that you can ...

Gary, This is not new behavior to V6 build 2. This cut away tenon returning across after a regen has always done this from the birth of the Part Editor. You must have just not seen/performed this specific scenario before. Some time in the future, we hope to be able to support the system tenons being...

Gary, I removed the PE cut from the top and added it back on and cannot reproduce this. Could you please give me some steps to reproduce this issue. At this point this does not look like a V6b2 issue, just maybe a scenario that you may have found. Anyway, if you can give me some steps, that would be...

Leigh, Will you please verify this for me: Is the error you're getting "There was an error while adding or removing tenons for the Top Stretcher Front........" and then a message "There was some problem while regenerating the Front Top Stretcher Press YES to lose PE cuts or NO to reve...

Josh,

Currently there is not. I have put this on the wish list in the past, so maybe we can implement something in the future.

Brian, It sounds like you are loading your cabinets from the old data path structure, saving into the new, then reloading from the old again. We allow you to load from anywhere, but you can only save in the User Data Path. By default this path will be: for XP: C:\Documents and Settings\All Users\Doc...

Georgi,

Thanks, that is all the info we need. I was able to reproduce it and have it listed to be fixed as soon as possible. Sorry for the inconvenience.

Jon,

I have reproduced this and have it listed for the programmers. It appears to be isolated to the drawer box bottoms. They do not seem to apply the dado depth to the part size. As you stated, the nest & CNC output are displaying correctly.

Chris,

Can you tell me what your directory name field reads when you are trying to save the cabinet. Please give me the entire string that is in that field.

Chris,

I tried it and it seems to be doing what it should. What pattern did you use?

Chris, You will need to populate the new Define Hardware with your product. eCabinet Systems no longer sells hardware items, as I'm sure you already know. Now, if you load cabinets or jobs that have the old hardware in them, it will display a Add hardware dialog where you can add them or replace the...