Thermwood / eCabinet Systems

Hi Clint, Thanks for the quick reply. This is the file I exported from the ShopBot Link. I only loaded two panels in the nest - one that cut a filleted rectangle fine, and the one with the holes that didn't. The rectangle was colored red in the link, the circles, black. Wouldn't let me upload the ca...

I've recreated the design of a small vacuum cabinet in eCabs with several part editor holes included. They all work fine, except for 2 , 2" holes, which simply don't cut. The partition in question shows up in the link as Partition 2. I am using the ShopBot Link, and it almost appears that the h...

I get this message when trying to create the CNC output file. Any ideas? Thanks

Software version - 6.1.5
Using Shopbot link

Hi Scott,

Thanks for the quick, informative answer! Makes perfect sense!

Regards,
Ron

Shouldn't the nest diagram show the extended blind dado length, compensating for the bit? I thought it should be overcut the bit radius + 10%
My nest diagrams show the tenons and dadoes the same length. 0.25" bit specified.

Thanks,
Ron

Perfect - Thanks, Scott!

Seems to work ok for me. I just updated to Build 14 today, and checked the irfanview folder. It had the i_view32.exe, and opens fine either manually, or from the Image Control in eCabinet Systems. It looks like version 4.27, which is about 4 years old, so I doubt it's an issue with the exe not being...

Thanks for the quick reply Scott!

I figured it out after posting.

One more question. If I want to notch the partition for the stretcher, how do I do that? I can't seem to figure it out. i.e. I want the top of the partition to be flush with the top of the stretcher.

Thanks,
Ron

Is there any way to add a drawer stretcher that I can actually use to set a partition to? Doesn't seem to recognize the stretcher in the partition editor...

Scott, I have a Radeon X800 series card, with the latest available drivers for Windows 7 Ultimate. If I'm correct, it seems to have started after I installed the materials library. I just tried changing the material color for Generic 3/4" material to sr-wood f-c White Birch. While it looks bett...

Scott,

The same phenomenon appears in virtually all the editor. Attached is a Std Base Frameless Cabinet, with default generic 3/4" sheet, and I changed the top material image. Hope this helps.

Thanks,
Ron

Thanks for the replies.

Scott - yes, cabinets loaded directly from the standard library also exhibit this look.

A couple of quick questions: The libraries from e-cab’s all have modular units – one full cabinet for each unit – meaning if I have a 30” cab with 2 doors and 2 drawers next to a 30” cab with all drawers, instead of using a 60” long bottom and a shared partition, I am supposed to make two complete i...

Thanks Kerry, A search was the first thing I tried, and I got a few more hits searching for "string table" instead of stringtable.mdb. I've pretty much tried all the suggestions, except to run the eCabUpdate.exe from the program directory, since this file apparently runs the 5.2 build 5 ve...

After installing v6, build 4, I get an error on startup that StringTable.mdb cannot be opened. I noticed that it moved this file from the application folder in the earlier versions into the All User app data folder. I checked, and everything appears to be there. I even tried uninstalling, installing...