Thermwood / eCabinet Systems

Here's something you'll like to hear. You can change the lower limit of your wateboard and tableboard thickness. Go into your "C:\system" directory and find the file called "THM.INI". This file shoud open in a text editor like notepad. serach for the variables "MinTableboard...

We will need your export file from Control Nesting also. Please email this file to program@thermwood.com along with your contact information and reference to this forum posting. Thank you.

Version 5.59 Patch 2 can be installed on THM version 5.05. You will not be able to install any version higher than that unless you upgrade the controller.

When Control Nesting is given an operation it checks the tooling list starting with the operation 1 tool then going down the list until it finds a tool it can use. If it goes through the operations list and does not find a tool it can use, it then passes the operation to the pocketing routine. This ...

It sounds like your sensor needs to be cleaned. You can take the sensor apart and clean any saw dust out of it y removing the 3 screws that holds the top pad on. Having the router move upwards instead of downwards is what usually happens when the sensor gets dirty and no longer has a closed contact ...

I was able to reproduce the issue now that I have seen the code you produced. When we tested the issue here, we were testing on version 7 and higher THM software. After seeing your code, I wrote the code for version 6 THM software and was able to reproduce the error. I have informed our software eng...

Mohan, I did test this the first time you sent me the file and I was not able to reproduce the issue as I stated in the email. Who did you send the files to the second time? If you have this happen again, send the CNC file along with the export to program@thermwood.com and someone will look into it ...

I never received the files requested. Please send the most recent files to program@thermwood.com along with information on the issue. This way, if I am not the tech that looks at it, they will know what they are looking for.

Your Fixture offset is not set correctly. If you perform flip operations first and then flip the whole sheet and it is not correct on the y axis, then you need to change your fixture offset by half the error. If you are flipping the parts one at a time, you will need to change the offset by the valu...

Contact CNC Automation for assistance. They should be able to properly diagnose your issue.

Please send us your TWD file and your machine export to program@thermwood.com so we can test and verify the issue. Please make sure to add your contact information in the email.

Our retrofit department should be able to discuss with you what you are wanting. If you want just on and off switches at the controller, or if you want the pump to be automated by adding code into the program to turn it on and off automatically.

Marius, Go to the website and download 5.59 patch 2. There was an issue with patch 1.

Scott, You will have to install the carving files on both the machine and the computer running ecabinets. If your machine does not have the carving libraries on it already, you will have to install the carving library utility first. Go to the page listed below and click where it says "CLICK HER...

There is only one label file (30252_Address_SINGLESHEET.RPT) that allows you to print the labels for each sheet as it is cutting and it is only available in Control Nesting version 5.69 and higher. If you are not using this RPT file, then it will print all of them at once and there is no way to stop...