Search found 636 matches

by Donald Thomson
Tue, Apr 23 2019, 4:26PM
Forum: eCabinet Systems Software
Topic: Door/Drawer Editor and Amesbury door
Replies: 2
Views: 5318

Re: Door/Drawer Editor and Amesbury door

Thank you Scott!!
by Donald Thomson
Tue, Apr 23 2019, 12:05PM
Forum: eCabinet Systems Software
Topic: Door/Drawer Editor and Amesbury door
Replies: 2
Views: 5318

Door/Drawer Editor and Amesbury door

I was wondering why the Amesbury door does not allow a frame only option? All the doors (except slab of course) allow me to make a glass door. The Frame Only check box on the General tab is greyed out. Just wondering. Also, for some reason, when I select a door/drawer face, it always defaults to Alt...
by Donald Thomson
Tue, Mar 19 2019, 10:25AM
Forum: eCabinet Systems Software
Topic: RELIEF HELP ME
Replies: 7
Views: 9709

Re: RELIEF HELP ME

I approached it a little differently. I created my "signature" by laser etching it into 1/8" thick baltic birch. I then apply the little 1"x3" signature plaques where I want them with double stick tape. For cabinetry I'll put a couple inside some drawers and a couple more on...
by Donald Thomson
Tue, Mar 19 2019, 10:17AM
Forum: eCabinet Systems Software
Topic: Shelf Standards or pilasters
Replies: 8
Views: 10405

Re: Shelf Standards or pilasters

Just curious, is this a one-off project or something you are going to be putting into a production environment? If it's a one-off, have you considered using a router and a straight edge to create the dados? Or maybe the table saw with a dado blade. I've found in my shop for tasks that are one-off or...
by Donald Thomson
Mon, Feb 04 2019, 4:19PM
Forum: eCabinet Systems Software
Topic: Need A FF Cabinet for A Farm Sink
Replies: 3
Views: 5424

Re: Need A FF Cabinet for A Farm Sink

Just used this one recently on a project
by Donald Thomson
Tue, Nov 27 2018, 7:54PM
Forum: eCabinet Systems Software
Topic: 6.2.3 is no different
Replies: 7
Views: 9451

Re: 6.2.3 is no different

Rick, are you saying we have to download from the website versus do the update from inside eCabs? Not sure why there should be a difference?
by Donald Thomson
Fri, Nov 16 2018, 10:24AM
Forum: eCabinet Systems Software
Topic: Adding a diagonal cut line on a part
Replies: 3
Views: 5219

Re: Adding a diagonal cut line on a part

Thank you Scott!!
by Donald Thomson
Thu, Nov 15 2018, 8:22PM
Forum: eCabinet Systems Software
Topic: Adding a diagonal cut line on a part
Replies: 3
Views: 5219

Adding a diagonal cut line on a part

I've got a cabinet side that I would like to create a diagonal cut on. The panel is 18" wide. I would like the diagonal cut line to start at the top back corner of the line and the cut extend to the front of the panel 6" from the top. I've tried part editor and contour editor and can seem ...
by Donald Thomson
Thu, Nov 01 2018, 5:06PM
Forum: eCabinet Systems Software
Topic: Adding an adjustable shelf deleted drawers
Replies: 1
Views: 3359

Re: Adding an adjustable shelf deleted drawers

Resolved by tech support.
by Donald Thomson
Thu, Nov 01 2018, 12:08PM
Forum: eCabinet Systems Software
Topic: Adding an adjustable shelf deleted drawers
Replies: 1
Views: 3359

Adding an adjustable shelf deleted drawers

Added two pull out trays using Drawer Box Editor. Positioned them where I wanted them. Went to shelf editor and added three shelves to the upper part of the cabinet. No problem. Added a shelf to the lower part of the cabinet, under the drawer boxes and the drawer boxes were deleted. Went back to Mai...
by Donald Thomson
Wed, Oct 17 2018, 9:23AM
Forum: eCabinet Systems Software
Topic: Support for existing SBLink customer
Replies: 2
Views: 5237

Re: Support for existing SBLink customer

Thank you Larry. :D
by Donald Thomson
Tue, Oct 16 2018, 5:41PM
Forum: eCabinet Systems Software
Topic: Support for existing SBLink customer
Replies: 2
Views: 5237

Support for existing SBLink customer

I heard that SBLink will no longer have any new releases and that the remaining SBLink dongles will be sold at half price and there will not be any support. For current customers (including those who've been using the Link since 2009 - ME) will there still be support available? Will there be any bug...
by Donald Thomson
Mon, Oct 08 2018, 11:02AM
Forum: eCabinet Systems Software
Topic: Working with End Panels
Replies: 7
Views: 10376

Re: Working with End Panels

Thanks Carmen!! I haven't seen this before. It is all the way at the bottom of the menu and I normally don't use anything that far down.
by Donald Thomson
Sun, Oct 07 2018, 1:55PM
Forum: eCabinet Systems Software
Topic: Working with End Panels
Replies: 7
Views: 10376

Re: Working with End Panels

Carmen Addamo wrote: I like that ecabs allows me to choose a matching door style end panel and puts it in place.
I know this is an older post, but I was wondering how this choosing a matching door style end panel and putting it in place works? I've been thru all the editors and can't find this. Thanks!
by Donald Thomson
Sun, Sep 09 2018, 2:26PM
Forum: eCabinet Systems Software
Topic: Maybe an option in CE?
Replies: 1
Views: 3818

Maybe an option in CE?

When in room editor, we can resize a cabinet and specify which direction to change the dimensions. For example, if I want to make a cabinet taller I can specify Top, Bottom or Both. Same with width and depth. I understand the reason for these settings in room editor. Would there be a way, when in CE...