Search found 181 matches
- Thu, Jun 06 2019, 3:37PM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF pocket behavior
- Replies: 9
- Views: 12790
Re: DXF pocket behavior
and for rolling back a version simply run the installer for an old version it will over write it
- Wed, Jun 05 2019, 1:04PM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF pocket behavior
- Replies: 9
- Views: 12790
Re: DXF pocket behavior
its not hard to roll back a version
- Tue, May 21 2019, 11:49AM
- Forum: eCabinet Systems Software
- Topic: susans
- Replies: 1
- Views: 4594
susans
why on susans is the right front and left front tied to the width of the cabinet (right back and left back)? its causing me some serious frustration this morning. im going to have to manually draw out the shape I need.
- Tue, May 14 2019, 5:45PM
- Forum: Thermwood 3-Axis Machinery
- Topic: CN v6.11 manual nest crash
- Replies: 5
- Views: 8017
Re: CN v6.11 manual nest crash
I just had this happen to me today. i can't send crash logs from the cnc for whatever reason but i hope it gets resolved cause i don't know how to delete an empty sheet outside of nest
- Fri, May 03 2019, 12:20PM
- Forum: eCabinet Systems Software
- Topic: Edge taping Drawer box issue
- Replies: 4
- Views: 7267
Re: Edge taping Drawer box issue
what edge is giving you the issue? I cant replicate it
- Wed, Apr 17 2019, 1:06PM
- Forum: eCabinet Systems Software
- Topic: Feature request Ecabinets
- Replies: 5
- Views: 8251
Feature request Ecabinets
Seeing as everyone else is doing I thought I would ask for something as well. on the batch editor sidebar under adj, feature could we have a User Part name Button? You could select multiple cabinets and be able to rename multiple cabinet parts simultaneously which would save a lot of clicks. just th...
- Tue, Apr 16 2019, 4:27PM
- Forum: eCabinet Systems Software
- Topic: Error message lacking info
- Replies: 5
- Views: 9568
Re: Error message lacking info
its probably a corner cabinet with a clipped corner I get this all the time....
- Mon, Apr 15 2019, 12:48PM
- Forum: eCabinet Systems Software
- Topic: Idea for the make phantom parts option
- Replies: 2
- Views: 5296
Re: Idea for the make phantom parts option
I like both of these ideas
- Fri, Mar 15 2019, 10:04AM
- Forum: eCabinet Systems Software
- Topic: Shelf Standards or pilasters
- Replies: 8
- Views: 10406
Re: Shelf Standards or pilasters
I set up dedicated boxes and used the constraint manager to make my dadoes. it was time consuming. I used the 5/8 wide ones and found adding 5.2mm to the length of the pilaster helped offset the round inside corners cutting using a 3/8 downshear.
- Thu, Mar 07 2019, 4:12PM
- Forum: eCabinet Systems Software
- Topic: metric bug in toekick height increment arrows
- Replies: 2
- Views: 4413
Re: metric bug in toekick height increment arrows
same issue inside hardware hole editor when in metric and you right click ----> edit move increment and hit the arrow buttons
- Thu, Mar 07 2019, 4:10PM
- Forum: eCabinet Systems Software
- Topic: metric bug in toekick height increment arrows
- Replies: 2
- Views: 4413
metric bug in toekick height increment arrows
when you are in cabinet editor and open toekick. have program in metric and set toekick height to zero and then hit the arrow up it increments in 25.4mm per click instead of 1.
can post video if needed
can post video if needed
- Thu, Dec 06 2018, 5:27PM
- Forum: Thermwood 3-Axis Machinery
- Topic: control nest 6.09 breaks off-fall labels
- Replies: 2
- Views: 6705
- Tue, Dec 04 2018, 1:07PM
- Forum: Thermwood 3-Axis Machinery
- Topic: control nest 6.09 breaks off-fall labels
- Replies: 2
- Views: 6705
control nest 6.09 breaks off-fall labels
updated to control nesting 6.09 and cut a job and went to print the off fall labels but it doesn't print properly with all the numbers. please see attached picture
- Tue, Nov 27 2018, 5:27PM
- Forum: Thermwood 3-Axis Machinery
- Topic: bug with rotating part that has profiled edge
- Replies: 1
- Views: 5525
bug with rotating part that has profiled edge
in ecabinets create a part that has grain and apply a profiled edge to one edge nest that part and rotate it 180 degrees and nest. look the graph screen and you can see the profiled edge is no longer attached the part. please see attached picture and I can make a video demonstrating this as well. se...
- Sun, Nov 04 2018, 11:59AM
- Forum: Thermwood 3-Axis Machinery
- Topic: issue with intime kernel
- Replies: 2
- Views: 6288
issue with intime kernel
hard a hard time getting the machine up and running keep getting this error message
any help would be appreciated it was error 20 not 25 though
any help would be appreciated it was error 20 not 25 though