Thermwood / eCabinet Systems

Good afternoon Ryan I have used the restore dvd and done a restore on the C: drive only. All is well, except I can not get the network to work. The CNC pc can see and log on to all the other pc on the network, but the other pc's can see the cnc pc but when you want to log on a little pop screen come...

Thank Ryan for the info

Good Morning The CNC machine is connected to our Lan which is connected to a router for internet access and e-mail. To make a long story short it is now in infected with the "malware doctor" virus. "AVG free edition" did not even detect. The only anti-virus that did detect it was...

Good afternoon
Thanks everybody for your response.

Thanks Nemanje
It does work, about 98% better, but there is still one to two pockets that the machine cuts into the material that it's not suppose to. I never had this problem, but since CN 5.45 it was never 100% anymore.

Good afternoon
I am trying to cut this cabinet that has a lot of pocket ops on the left and right side aswell as the top. The problem is that when it does a clean-up operation it cut into the material that it is not suppose to cut into.
I am including all the files
Thanks in advance

Good morning. When I want to access the CNC Rental this morning (F10, F4) I get the following message "Security Error Unauthorized access to program database has been detected. Please call Thermwood or enter reset code" We did quite a bit of carvings ad the end of last year and everything ...

Good afternoon Todd
Thank you, and all the people working on this to solve the problem.
Glad my company made the right choice when they bought this cnc machine.
"Thermwood is bakgat"

Good morning Todd
I have zipped everything for you and will e-mail it to you now.
Ja, I have post the .cnc files and not the .twd files stupid me.
Thank you very much
Marius

Ok
Just tried to cut two partitions with dado's and the same thing happen. The machine ramp in at the dado then cuts into the part by more or less the radius of the cutter, then it reverse (back track) and then carry on by cutting the part.
I have again included the .twd file.

Good morning Install Control Nesting v5.44 at the end of last year and everything was a mess. Did a system restore to go back to 5.41 and everything back to normal. When we re-open on Monday I see that there was a 5.45 available and install that, everything seem fine until this morning when I want t...

Thank you very much Daniel
I love information.

Good Morning Will I have discovered this by accident when I download the letter block program from somewhere here at the forums. the prog did not want to work the way it was meant to so I change it a bit, and it works fine now. Now I am not a guru, but what it seems to do is that if you have a G807 ...

Good Afrternoon I operate our machine since the first day it arrived in the shop, and it always left a little ridge.(two and a half years ago) I cut all my MDF with a 12.7mm up-down cutter. 32mm MDF I cut with 18mm diamond cutter, and it does the same. We have 3017mm x 2133mm moving table set-up (C4...

Morning Glen Put the X and Y measurements in for the first sheet you want to add and then select "Accept Sheet" Now it add that sheet to the "Sheet(s) List" Now if you want to add another sheet with the same length and width, just double click the one in the "Sheet(s) List&q...