Search found 281 matches

by tim lucas
Wed, Mar 27 2019, 6:22AM
Forum: Design Sharing
Topic: Full Shelf/Partitions or Stretchers??
Replies: 4
Views: 17360

Re: Full Shelf/Partitions or Stretchers??

Good morning, I don't think you need full shelves but using stretchers is a lot of work, try using the insets for the shelves like (inset the rear shelf say 10") you can also use negative numbers for insets and make things stick out. The partitions work the same way but in your case I would lea...
by tim lucas
Mon, Feb 04 2019, 6:34AM
Forum: eCabinet Systems Software
Topic: Presentation view not working
Replies: 20
Views: 20667

Re: Presentation view not working

I am not sure what is wrong - hopefuly Clint will have an idea

Sorry
Tim
by tim lucas
Sun, Feb 03 2019, 7:08AM
Forum: eCabinet Systems Software
Topic: Presentation view not working
Replies: 20
Views: 20667

Re: Presentation view not working

I am having no problem with it, have you checked to make sure you have the currant graphics update
Tim
by tim lucas
Tue, Jan 22 2019, 7:16AM
Forum: eCabinet Systems Software
Topic: Measure
Replies: 2
Views: 4725

Re: Measure

Thanks Kerry!
by tim lucas
Fri, Jan 18 2019, 8:52AM
Forum: eCabinet Systems Software
Topic: Measure
Replies: 2
Views: 4725

Measure

Sure would be nice if we could measure things in the custom layout area. I need to locate plumbing in the floor located from the walls, I am using a display cube for the plumbing as no pipes in custom layout.

Thanks
Tim
by tim lucas
Mon, Sep 03 2018, 6:34AM
Forum: eCabinet Systems Software
Topic: How to update assembly components?
Replies: 4
Views: 6951

Re: How to update assembly components?

Thank you Mark & Tim, I appreciate hearing your thoughts. After reading them I can see that, once again, there are many different ways to use eCabs, and that I could have explained mine a little better. Mark: When I 1st started using eCabs I took a couple of pokes at CL (custom layout) and soon...
by tim lucas
Sat, Sep 01 2018, 3:33PM
Forum: eCabinet Systems Software
Topic: How to update assembly components?
Replies: 4
Views: 6951

Re: How to update assembly components?

Howdy all, I'm interested in your two-cents worth. I'm wondering if/how anyone out there uses assemblies? I'm sure there's some of you, and I'd be interested in hearing your take on them and what you use them for. Here's my scenario/motive: I'm preparing to build an island composed of multiple cabs...
by tim lucas
Fri, Aug 10 2018, 7:38AM
Forum: Thermwood 3-Axis Machinery
Topic: Keyboard cleaning
Replies: 3
Views: 6365

Re: Keyboard cleaning

Can you just buy another keyboard??
by tim lucas
Thu, Aug 09 2018, 8:01PM
Forum: eCabinet Systems Software
Topic: Changing grain direction
Replies: 2
Views: 4591

Re: Changing grain direction

Yes you can change the grain. Take the cabinet to the editor click on the back and enter the angle you need. You can change any sheet good the same way - sides , deck top ...
Capture.JPG
by tim lucas
Fri, Aug 03 2018, 5:42AM
Forum: eCabinet Systems Software
Topic: Trouble Opening Cabinets
Replies: 5
Views: 7899

Re: Trouble Opening Cabinets

sorry but it sounds like you have some corrupt files - load your backup and see if they work better
by tim lucas
Fri, Aug 03 2018, 5:40AM
Forum: eCabinet Systems Software
Topic: Create Seam?
Replies: 3
Views: 5621

Re: Create Seam?

yes, but you will have to treat it as an assembly using 2 parts
by tim lucas
Sat, Jul 21 2018, 10:15AM
Forum: eCabinet Systems Software
Topic: Can't have 2 faceframe thickness materials?
Replies: 15
Views: 17573

Re: Can't have 2 faceframe thickness materials?

ok so you will have to work around it with 2 cabinets - one with 3 or 4 inch thick face frames and one with 3/4 frames and make an assembly
by tim lucas
Sat, Jul 21 2018, 8:54AM
Forum: eCabinet Systems Software
Topic: Can't have 2 faceframe thickness materials?
Replies: 15
Views: 17573

Re: Can't have 2 faceframe thickness materials?

Leo Graywacz wrote:Doesn't work. As soon as you switch to another thickness it populates the field with that thickness wood and you lose the side stile thicker wood.
If you click ALL it will populate ALL to the same thickness otherwise you can set each one individually
by tim lucas
Sat, Jul 21 2018, 8:51AM
Forum: eCabinet Systems Software
Topic: Applying knobs and pulls
Replies: 5
Views: 7480

Re: Applying knobs and pulls

Make sure your graphics card has the latest updates
by tim lucas
Sat, Jul 21 2018, 7:50AM
Forum: eCabinet Systems Software
Topic: Can't have 2 faceframe thickness materials?
Replies: 15
Views: 17573

Re: Can't have 2 faceframe thickness materials?

go into face frames and then

consturction settings then into page 2
ff 1.JPG
now you can select differant material for your stiles and set the width as you want
ff 2.JPG
Tim