Search found 90 matches
- Tue, May 27 2008, 7:44PM
- Forum: eCabinet Systems Software
- Topic: Drawer box problem in version 5.2 and 5.1
- Replies: 3
- Views: 3453
Re: Drawer box problem in version 5.2 and 5.1
Hi, Dan. I had the same problem in 5.2 and the guys at Thermwood said there is a problem and they are working on a patch. In the mean time I found that if I set my tennon to 49% everything works OK. Hope this helps.
- Fri, May 23 2008, 3:12PM
- Forum: eCabinet Systems Software
- Topic: Need Input-Over my dead body
- Replies: 2
- Views: 3069
Re: Need Input-Over my dead body
Paul, I used another software for 20+ years until I bought a Thermwood CNC router about 10 months ago. The difference between what I was using and ecabinets is profound and the learning curve was pretty steep but I stuck with ecabinets and am glad I did. The cost was one factor but, also, I think it...
- Mon, May 19 2008, 7:51PM
- Forum: eCabinet Systems Software
- Topic: build in house doors
- Replies: 2
- Views: 3123
Re: build in house doors
William, when you open the cut list there is a board stock summary which shows all of the board stock in the job. The problem I have had is the door stock is not separated from face frame stock, all the board stock is listed together. Also, I have not found where the board stock is listed for the dr...
- Mon, May 19 2008, 3:45PM
- Forum: eCabinet Systems Software
- Topic: DRAWER BOX ERROR
- Replies: 3
- Views: 4096
Re: DRAWER BOX ERROR
Thanks, Larry.
- Fri, May 16 2008, 6:36PM
- Forum: eCabinet Systems Software
- Topic: DRAWER BOX ERROR
- Replies: 3
- Views: 4096
DRAWER BOX ERROR
Could someone at Thermwood look at this file and tell me what is wrong? The mortise machines properly but the tennon is too thin. Thanks in advance!
- Sat, May 10 2008, 10:52AM
- Forum: eCabinet Systems Software
- Topic: Corner cabinets
- Replies: 7
- Views: 5129
Re: Corner cabinets
Jean, you can get them where you want but you need to use weird left to right measurements like -11.5 or 12. stuff like that. It is a process of trial and error. I have had this same issue pop up from time to time and I have not figured out why it happens. Hope this helps.
- Wed, May 07 2008, 3:47PM
- Forum: eCabinet Systems Software
- Topic: DRAWER BOX ERROR
- Replies: 10
- Views: 6951
Re: DRAWER BOX ERROR
I hope I did this right. Thanks!
- Wed, May 07 2008, 12:13PM
- Forum: eCabinet Systems Software
- Topic: DRAWER BOX ERROR
- Replies: 10
- Views: 6951
DRAWER BOX ERROR
After installing the 5.2 update I now have an error in the drawer box editor. When I add a drawer box the first message reads; "Failed in generating CNC data." I hit OK and this message pops up; "There was an unexpected error while handeling CNC data operation in Drawer Box edditor. R...
- Tue, Apr 22 2008, 7:10PM
- Forum: eCabinet Systems Software
- Topic: Sign up sheet for Programer and tech support day
- Replies: 26
- Views: 20032
Re: Sign up sheet for Programer and tech support day
Stamp my plastic!! I'm in.
- Fri, Apr 18 2008, 3:50PM
- Forum: eCabinet Systems Software
- Topic: Rough Cut Panels(Beware of math below)
- Replies: 6
- Views: 5215
Re: Rough Cut Panels(Beware of math below)
I suggest you use the cut list and not the nest diagram. The nest diagram is optimized and works real well with a CNC macnine but, I think, it would be much faster to simply use the cut list. You will not be optimizing your material but you will save a ton of time. I know that material costs are imp...
- Fri, Apr 18 2008, 1:40PM
- Forum: eCabinet Systems Software
- Topic: Rough Cut Panels(Beware of math below)
- Replies: 6
- Views: 5215
Re: Rough Cut Panels(Beware of math below)
Eric, are you cutting these panels on a router or are you using a dimension saw? If you are not using a router you may want to print a cut list and cut your parts off of that instead of the nest diagram.
- Tue, Apr 15 2008, 7:36PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Restart to a line in RP-FR-MF0005
- Replies: 6
- Views: 4555
Re: Restart to a line in RP-FR-MF0005
Dan, I have run this program and you can restart it. The way we did it was to write down what line of code the tool changes happen on and restart there. The lines of code are incripted but you can reed the line numbers. You have to watch the machine to see when these occur but it can be done. It is ...
- Mon, Apr 14 2008, 9:50AM
- Forum: eCabinet Systems Software
- Topic: Sort of Off Topic and a Rant
- Replies: 15
- Views: 12983
Re: Sort of Off Topic and a Rant
It's no wonder this forum is so helpful! The character of the members is outstanding and it is truely refreshing to know that so many of you have put your faith and trust in the Lord. He most assuredly is the provider of all we need for "every good and perfect gift is from above."
- Sat, Apr 05 2008, 5:51PM
- Forum: Thermwood 3-Axis Machinery
- Topic: MDF DOORS
- Replies: 7
- Views: 5373
Re: MDF DOORS
I may be all wet here but can't you establish tool groups for specific materials in controll nesting?
- Mon, Mar 31 2008, 8:01PM
- Forum: eCabinet Systems Software
- Topic: toe kick construction
- Replies: 5
- Views: 5517
Re: toe kick construction
Glenn, the front of the toe is the top rail, the back of the toe is the cabinet back, the right and left are cabinet ends, and the stretchers are cabinet partitions.