Thermwood / eCabinet Systems

have orderd some more ram, 4 x 1gb sticks of ram, its the same speed. will see how they go when they arrive. fingers crossed.

hi, ive searched this forum and not sure if ive missed a post that might explain how to do it. we do flatpack kitchens and are wanting to be able to print out detailed sheet of each cabinet and what parts are required for that cabinet e.g lh end, back, deck, top rail etc. to make it easier for the p...

i have this same issue, both times i went to export job to the machine to cut it crashed then when i reloaded the saved esj file and exported again it sent through without a hitch

yeah i read the ram and ours is DDR400 too, but the motherboard must not support 2gb ram sticks, thanks for your help will see what i can find in 1 gig

[i have installed new ram they are 2 sticks of 2gb, but on startup makes a continuous beep and does not boot up. which means either the ram is faulty or the mother board doesnt support 2gb sticks
do you guys know if this is the case or?

thanks will

i will organize them and i will report back when they are installed

thanks again

chris

hi william , we are using windows xp so im not sure if that allows for a higher ram to be used? im unfamiliar with xp

thanks for the idea Forrest, but at this time its not practical for us to do it that way.

hi william, we are using 1Gb of ram

Thanks daniel i will give that a shot, just a tad unsure on what you mean by close the nesting and then open it again between batches do you mean clear what has been loaded?

thanks for the ideas i will give that a try

disk defragment or disk cleanup cleaned up alot of files but still hasnt really made much of a difference to the speed of loading.

we have a Thermwood MTR36004 3 axis machine. Over the years the machine has been gradually getting slower and slower, for example when i go in to the control nesting it sometimes takes a while for it to load up and then when we go to load a job that also takes some time to load and nest. a simple tu...

sorry i didn't get back to you about this.

the error seems to have fixed itself. must have been a glitch in the system that needed a bit to refresh

we have the same problem here when we do flip operations its out about the same distance. generally when we have to flip the cut is on the opposite side to the 0 point so we just nudge it down to suit. but i will follow this post to see if anyone knows a fix

hi larry, the settings are still the same.. the 'no outine cut' is not selected, even if it was selected it doesnt create an error like the ones shown

hi larry, the settings are still as they were originally, i can nest and cut our melamine material perfectly its just this material.. i have changed the name of the material that we are trying to cut and it has solved the issue. i dont understand why that has made a difference as i also added the ne...