Search found 281 matches
- Tue, Mar 17 2015, 9:35PM
- Forum: Design Sharing
- Topic: Planter box
- Replies: 0
- Views: 21241
Planter box
It is spring time and I made a couple planter boxes for my wife out of solid cedar Using ecabinets and constraint manager, the box is set up so it can be resized. for the pegs to hold it together I use some of the scrap 1/4" x 1/4" and about 1" each. let me know if you have any proble...
- Tue, Mar 17 2015, 8:19PM
- Forum: eCabinet Systems Software
- Topic: Here's one for the gurus
- Replies: 4
- Views: 5128
Re: Here's one for the gurus
Hi Don,
I'm not a guru but if I remove the deck and place a mid rail 4.5" off the floor I can install a drawer in the opening
hope this helps
Tim
I'm not a guru but if I remove the deck and place a mid rail 4.5" off the floor I can install a drawer in the opening
hope this helps
Tim
- Wed, Mar 04 2015, 12:00PM
- Forum: eCabinet Systems Software
- Topic: Curved top of cabinet
- Replies: 6
- Views: 10959
Re: Curved top of cabinet
well .... , I went back in to the cabinet and now can't reproduce it, works like it should
I must have done something to the board prior that created the error.
Thanks
Tim
I must have done something to the board prior that created the error.
Thanks
Tim
- Wed, Mar 04 2015, 8:31AM
- Forum: eCabinet Systems Software
- Topic: Curved top of cabinet
- Replies: 6
- Views: 10959
Re: Curved top of cabinet
Still working on my cabinet, using part editor on a display board, I am having a problem creating a part using closed contour
- Sun, Feb 22 2015, 7:55AM
- Forum: eCabinet Systems Software
- Topic: Turn Off 'Show Hole Patterns'
- Replies: 4
- Views: 4297
Re: Turn Off 'Show Hole Patterns'
I don't see a way can turn it off permanently either
- Sat, Feb 21 2015, 10:29PM
- Forum: eCabinet Systems Software
- Topic: Turn Off 'Show Hole Patterns'
- Replies: 4
- Views: 4297
Re: Turn Off 'Show Hole Patterns'
Nat, I tried and it seemed to stay turned off while in cabinet editor between modules but if I return to the room and come back it resets.
Is that what you mean?
Tim
Is that what you mean?
Tim
- Fri, Feb 20 2015, 7:47PM
- Forum: eCabinet Systems Software
- Topic: Nest Diagram?
- Replies: 16
- Views: 13204
Re: Nest Diagram?
Ok - Scott will work you through it - its over my understanding
be sure you deleted each of the files they listed
sorry I could not help
Tim
be sure you deleted each of the files they listed
sorry I could not help
Tim
- Fri, Feb 20 2015, 7:37PM
- Forum: eCabinet Systems Software
- Topic: Nest Diagram?
- Replies: 16
- Views: 13204
Re: Nest Diagram?
Calvin
Do you get this message when you try to nest any job or cabinet? or just this one?
Tim
Do you get this message when you try to nest any job or cabinet? or just this one?
Tim
- Fri, Feb 20 2015, 7:34PM
- Forum: Customer 3D Files
- Topic: Laundry Sink tub style with stand
- Replies: 6
- Views: 25196
Re: Laundry Sink tub style with stand
Hey George,
The sink is in job file format and I cant remember how to convert it to an HSF file
The sink is in job file format and I cant remember how to convert it to an HSF file
- Fri, Feb 20 2015, 12:20PM
- Forum: Lounge
- Topic: Production sharing
- Replies: 2
- Views: 15524
Re: Production sharing
On Thermwood production sharing page they show 4 shops in Illinois
http://www2.thermwood.com/eCabinetReq.n ... L?OpenPage
http://www2.thermwood.com/eCabinetReq.n ... L?OpenPage
- Fri, Feb 20 2015, 12:15PM
- Forum: eCabinet Systems Software
- Topic: Nest Diagram?
- Replies: 16
- Views: 13204
Re: Nest Diagram?
Hi Calvin,
Can you zip up the cabinet or job and post it here, I will try it and see what I get
Tim
Can you zip up the cabinet or job and post it here, I will try it and see what I get
Tim
- Fri, Feb 20 2015, 8:22AM
- Forum: eCabinet Systems Software
- Topic: Curved top of cabinet
- Replies: 6
- Views: 10959
Curved top of cabinet
Need a little help, Would like to know how you would go about drawing the top of the upper cabinet in this picture. Mark Thompson bathroom.png I am currently using a 8" wide top rail and cutting it to match the curved area, but would like to know any other ideas W2430.jpg Thanks for any help Tim
- Thu, Feb 19 2015, 7:49PM
- Forum: eCabinet Systems Software
- Topic: Wall to short message
- Replies: 20
- Views: 15882
Re: Wall to short message
Yep, would definitely mess you up!Jeff Christenson wrote:Tim, that looks familiar. I think you have something here.
- Thu, Feb 19 2015, 7:40PM
- Forum: Customer Images
- Topic: eCabinet prersentation images
- Replies: 6
- Views: 25021
Re: eCabinet prersentation images
Very nice layout. can you teach me on how to make sink in a cabinet? Thanks a lot Hi John, You can sign up for and learn how to add a sink and so much more from the training center http://www.thermwood.com/ecabinetsystemstrainingcenter/Catalog.aspx?cat=4 It would take me about an hour to try to exp...
- Thu, Feb 19 2015, 7:33PM
- Forum: Customer Images
- Topic: Our latest kitchen
- Replies: 3
- Views: 17908
Re: Our latest kitchen
When will the coffee be ready??
Very nice!
Very nice!