Thermwood / eCabinet Systems

On one of the jobs i am working on, when I print a line drawing to a PDF file it prints fine, but when I try to print another page, I get a message "invalid argument was encountered" and the look of the drawings change to a more conceptual view. The view looks like the 2020 drawings where ...

Thanks for the reply Kerry. I have the latest driver in place, released 1/7/2011. My computer is a Dell M6400 mobile workstation, 4GB Ram, Nvidea quadro FX3700M. I also downloaded the latest mouse driver. The problem also exists in the shelf and drawer box editors. Maybe the faceframe editor as well...

If I Right click then close the right click window everything works as normal. If I try to select an opening before doing this, only part of it is highlighted. I tried uninstalling and reinstalling the software with no change. This is happening in all my jobs, all the cabinets in the jobs. No one el...

Check if the false front at the top has a slide associated with it. Go to the drawer/door editor and remove the slide if so.

Jon

As I work with it, I find in the door editor, I can only highlight the right upper corner, but if I right click to open the menu, then close the menu, everything operates as normal.

Anyone else seen this?

Jon

Also, when in the drawer box editor, if I highlight a space between the drawers, only half of the opening highlights. If I deselect that area I the can normally select any areas. This was not an issue before reinstalling the software. All these cabinets were designed in version 6.

Jon

I recently had to reinstall the software and some strange things are happening in the door editor. When I click to highlight the door, only the top right corner highlights. It can be deleted, then operates as normal. When the top right hand corner is highlighted, it is like a small zoom window that ...

I have a framed angle front corner cabinet that will not size the door properly when the door inset is set to 3/4". The overlap changes to gap, as it should in the door editor, but when it returns to the main area, the door changes sizes, and the gap is returned to overlap. I have the right and...

You could place them in you job as a display panel and add the total length or width and add them as one part, then separate later at the saw. I do this for tall refrigerator panels that I want a continuous grain pattern.

Does this make sense?

Jon

I just created a new seed cabinet w/ a stretcher for a screw rail, and it still changes wdth when changing the cabinet height when brining it into a room.

Jon

Did you try resizing as you bring it into a room, or in the CE. CE works fine, room lay out doesn't. I created 2 cabinets, one 1 door, and 1- 2 door. Both had the same issue. It even got smaller when the cabinet was resized to a smaller size. I have since just eliminated the stretcher. But if It add...

Kerry, The room rotates smoothly, but when I select a cabinet to place, it's jerky. Also after working with it for awhile, it takes 60 seconds to take a cabinet to the ce. I have several PE cuts on the cabinet stiles. Maybe this slows it down. I st the virtual memory to 3072/4096 as was recommended ...

I just update the driver from Dell,s site. No change.

Jon

It's posted a couple ot threads down.

Jon

This job seems to be especially problematic. After working with it for awhile, it takes over a minute to take a cabinet to the CE. I had to create a 2nd room to get the island in it. If my computer doesn't run this software, then what machine will?