Thermwood / eCabinet Systems

Vince, I had something similar to this once where my hardware patterns were replacing my customers patterns. When they sent me the file and I would open and look at a cab default, it would replace there hole pattern with mine. Same hardware different patterns. I don't know why and could never repeat...

Guys, Thermwood is working on the Vista issue to hopefully come up to date quickly. The major problems that I've heard from IT guys are printer related in general. One thing I've noticed is ghost cabs are more common than ever. My icon also will not change to 5.1 and had to be renamed manualy. Howev...

Dave,

Thanks for the correction. Yes, no fun stuff here either.

Forrest

As David suggest conventional cutting will leave more and more fuzz as the bit loses its edge. While the downside to cutting conv. is when the bit leaves an lipped edge on skinned parts. Hopefully Thermwood will help us resolve this issue by allowing a roughing pass or multi directional outline cuts...

Ryan,

I'm running CN 5.12 and have seen this problem with part edits. Will upgrading fix this? Here are pics and twd.

Forrest

Mark, It should not let you NC reset when this occurs. However my operater has hit the home key on the handheld which is a system overide. There is something so wrong with the feeling you get when you snap that first arm off. The second one doesn't hurt as bad. Eric, Make sure the tapers on your too...

Leo,

I to have been getting the OOM error but only on files created in 5.0 and only when making to many changes before saving. I beleive this is an issue with not saving often enough. Try going back and changing maybe 3 cabs and then saving.

Forrest

V5.1.2

Ted, Try taking the cab back into shelf editor and left click on the shelf to highlight green. Then go to construction settings and if everything is just so then hit OK. To make changes to existing shelves or partitions you have to highlight them and be in the respective editor. Hope this helps. For...

Bill,

If you emailed the file then you may need to zip it. Ocasionaly bad files have something to do with the email provider and may need to be sent again. You can also try posting the file in a private message on this site and sending it to him.

Forrest

Guys,

I got the same popup, but mine was on a large job. Still, never happened before.

Forrest

George,

If you need maple ply I can get 48.5 x 96.5 if that will help. If you set your nesting collar at 0 you should get 48 wide to nest.

Forrest

Donald,

Where in SC are you? Maybe a member is close enough you can load from there disk until your's arrives. You will need your own registration code which you have in V4.

Forrest

Paul,

Just build the desk the way you want every joint to fit and then globally choose rta construction. You may need to go back and change some sides that the fittings are applied to but its a good starting point. You may also want to apply other types of jointery to some specific parts.

Forrest

Guys,

I'd like to see a choice in hardware section for custom selections with our own patterns and prices assc..

Forrest

Justin,

Is the material single sided perhaps?

Forrest