Thermwood / eCabinet Systems

Hi

Is it possible to make this in control nesting not the profile modeller, there are 2 outer bevels and 2 inner flutes on the part in the picture

Thanks Stephen

Daniel,
Success at starting on the top edge, climb cut as you look at the part in ecabs,so on the curved parts we’ve made we cant just start anywhere.

Cheers Stephen

Hi Daniel
I will email the toolset file to you, the two attachments are of how parts were created and tool path.

Thanks Stephen

Hi Ryan

The tool is 26mm in diameter as we are working in metric, the tool #132 for the exterior profile and this tool is set in the tool manager and the default tool in the profile modeler.

Stephen

Hi Ryan We have tried the MDF Door tooling settings and have gone through everything, checked that our tooling is set correctly when we tick the box custom tool interior the tool goes out of bounds if there is a tick on others the tool goes on the outside outline, this is marked red on the photo we ...

Ryan / Josh
I have sent files with email and I have forward them to you Josh
Thanks Stephen

Ryan/Josh

I will post files tomorrow when back at work I cant seem to add them to the post!

Cheers Stephen

Hi Daniel

Still not possible after we have tried what you suggested, here is a photo of the results


Thanks Stephen

HI Ryan, Hopfully its not going to be the same scenario! you posted on March 03 2010 Stephen, Thanks for all the information that you've submitted as we looked into this issue. This issue has been reproduced and documented. Has this issue been resolved! Is it possible to cut parts in control nesting...

We are still having the same major issue profiling parts in control nesting. Door/Drawer editor opposite direction?. Is there still a problem with the door/drawer editor, the exterior profile tool (additional offsets) are ok on screen in ecabs, but put through the supercontrol the tool offsets are i...

Hi

Since the update very large parts get a double pass all parts and under that a skin is left on [not cut through] is there a quick fix?

Thanks Stephen

Hi Daniel thanks for the reply
On trying this out we have found that the apply radius comp does not work in the tool dialog box in the door/drawer editor,but it only works in the part editor.

Thanks Stephen

Hi Daniel/Ryan When we make a door in the door/drawer editor we don’t save it to a cabinet [we don’t use the custom layout]. We make a door in the door editor save it close it then click load item, click door/drawer enter sizes then click select door, this open in the door drawer editor select the d...

HI Daniel

This is not a problem to us as we use a door package we just thought we’d point it out because its the second time we’ve came across it, the file attached is of what it looks like in eCABS to what happens after machining,This problem also happens when you use any tool.

Thanks Stephen

Is there still a problem with the door/drawer editor, the exterior profile tool (additional offsets) are ok on screen in ecabs, but put through the supercontrol the tool offsets are in opposite direction?.

This was pointed out with an email in march 2007

Thanks Stephen