Thermwood / eCabinet Systems

Hello To add the backing strips - in cabinet editor, add display panels of your choice wood and size. By adding display panels they will be set in your cut list and nested You can use the part editor to rabbit the back of the face frame if you want to see it but otherwise when setting your panel you...

Tony You are correct, you can not save 2 cabinets as 1 but your assembly will work just like a cabinet in your room As I said I did not cut my hood it was for show only. I looked at yours and if that is what you need then it is just right. If you are planning to cut it out and build it I might sugge...

Thank you Mark, Yes Kerry spoke about Accu Trans 3D and I am trying to learn on it but I don't really understand 3D I have not been able to find a DXF or STL file to import for the wood rack, did you draw yours from scratch? I downloaded the HSF files and will play with them Thank you again Tim

Here is the file for it I just used the rotate tool and part editor to create the look of the hood - I did not cut the hood out from this file

Tim

t w fortier wrote:Hi...
Is there a way to slope the top of a vent hood in ecabinet or door ?
tony

Is this what you mean? or Tim

Many times George D. has created 3d items for myself and others but I would like to learn a little so...

I have searched the web for a DXF or STL file of a under cabinet wine glass rack no find

how would I start to create this ??
Thanks
Tim

The only thing I can think of is in the "Drafting Parameters" you could set Round to nearest inch = 1.0 right click on page for Drafting Parameters

Maybe that will help

Tim

Ok I think your on to something - I loaded a corner cabinet from the standard library and I CAN reproduce the circles

so it must have something to do with that library of cabinets and the gremlins are still running loose

Tim

Not seeing it here

Tim, Thank you. That helps. Do you know if there is any way to get dimension lines to these interior walls. Not sure what you mean, should look like this Capture.PNG Or if you need more, you can take the layout into the "Line Drawing Editor" and add all the measurments Capture2.PNG Tim

If you set your starting point to 0,0 to start building your walls you can calculate where you need your interior walls

and if you turn on your snap and set it to 1 inch it will make it a little easier

hope this helps

Tim

For what it's worth. There is a beta version of the link 1.0.21 Beta 1. If you use a ShopBot you should use this version. If tenons are too long you might try setting the dado depth clearance deeper when you create your cabinet, if the tightness of your machine is similar to the tolerances you set ...

I cut the pocket with a 1/4" down and use a compression for the outline
It seems like the pocket should cut out a little more

Thanks
Tim

Using a blind dado for a joint and the tenon needs lots of cleanup

In the Shopbot link, is the pocket tool setup used to clean it up? Thanks
Tim

Yes, well said !!

Thank You, Thank You!!