Thermwood / eCabinet Systems

Cutting pockets using spiral path with a 1 1/2' cutter set to 72% step over. I have Dado/Rout ramp in setting set to 6" but for some reason I get several parts that the plunge happens on the shortest line possible. It appears to be starting in the step over not the actual rout. I've slowed it f...

I just add a few inches to the wasteboard thickness setting. As Brad posted while I was typing.

Not a big deal, Edit/Edit Depth button doesn't seem to be working. Can't select anything. But Edit/ Edit Constraint will let you select depth or constraints.

Download, then install this Microsoft Visual C++ redistributable from http://www.microsoft.com/download/en/de ... en&id=5638

Try ProgramData Thermwood eCabinetSystems ECabinets.mdb

Thanks Clint, works good.

Tommy, FYI. Label cabinet numbers will not match actual cabinet numbers if you change the quantities at the control or have multiples of the same cabinet from a batch either.

My scanner reads it fine. The actual recut ID number is right at or slightly off the bottom edge of the label. But that might be a tracking problem with my printer.

That's a lot better Clint.

Works for me with DYMO 400 Turbo. Cabinet number could be larger but this works.

In CNC View, type T,M,L Line Teach opens Cursor is in axis box, type 1,enter Cursor moves to Distance box, type 10(or any number) ,F11 or F12 no movement. Same with step plus and minus buttons they turn blue but no motion. MDI move is checked. F10 or undo teach returns to CNC view. Type T,M,L, 1 ent...

Why not just use the cabinet number already assigned by eCabs? A big font. Its already there on the cutlist, drawings, on the controller, even the buy list. Need to recut a deck for cabinet 23? Open the .twd scroll down to cab #23 and select the part. It would be helpful if we could renumber the cab...

Is there a way to control where a dado or pocket ramp starts? I know how to set a start point with a .dxf but I have some parts created in eCabs with pockets that Cn wants to start the ramp on the shortest side. I have my dado pre ramp set at .01" and length at 4" with a speed of 40 ipm so...

Any time I manually nest and end up with an empty sheet THM crashes when I write cnc. Pop up says empty sheets will be removed and sheets renumbered. Screen grays out and after a few minutes says software has stopped and must be restarted. As long as I leave one part on every sheet it writes correct...

Same issue in the change materials in the room area. An error saying a constraint can't be applied and will be removed or a locked opening wont allow the change. No idea as to what part or cabinet. Probably more annoying is when that dialog pops up, it stops working until you hit ok. Sometimes chang...

Got it, removed left end part editor cuts and reapplied them. All is well. Thanks