Randy,
There are two options I believe:
1. You have to change the sizes in the construction settings before you add them
2. If you have already added them you have to select them by clicking on them and then change them in the constructions settings.
Zach
Search found 134 matches
- Fri, Sep 18 2009, 6:32PM
- Forum: eCabinet Systems Software
- Topic: Face Frames
- Replies: 4
- Views: 4141
- Thu, Sep 03 2009, 1:59PM
- Forum: eCabinet Systems Software
- Topic: Printing Problem
- Replies: 10
- Views: 7296
Re: Printing Problem
Scott,
That solved the problem. Thanks everyone for the help.
Zach
That solved the problem. Thanks everyone for the help.
Zach
- Thu, Sep 03 2009, 9:32AM
- Forum: eCabinet Systems Software
- Topic: Printing Problem
- Replies: 10
- Views: 7296
Re: Printing Problem
Dan,
I tried clicking on print setup while in the line drawing editor, but nothing comes up on the screen.
Zach
I tried clicking on print setup while in the line drawing editor, but nothing comes up on the screen.
Zach
- Wed, Sep 02 2009, 12:43PM
- Forum: eCabinet Systems Software
- Topic: Printing Problem
- Replies: 10
- Views: 7296
Re: Printing Problem
I can print from the buy list and cut list, but I am still getting the same message when I open up the LDE. It is still telling me to check the print setup, but when I click on print set up nothing happens.
I am still using XP.
Thanks,
Zach
I am still using XP.
Thanks,
Zach
- Tue, Sep 01 2009, 4:56PM
- Forum: eCabinet Systems Software
- Topic: Printing Problem
- Replies: 10
- Views: 7296
Re: Printing Problem
I tried restarting and the installed the latest drivers. The funny thing it was working fine and is still working fine with other applications. It is only Ecab that is giving me the problem.
Any other suggestions.
Thanks,
Zach
Any other suggestions.
Thanks,
Zach
- Mon, Aug 31 2009, 1:18PM
- Forum: eCabinet Systems Software
- Topic: Printing Problem
- Replies: 10
- Views: 7296
Printing Problem
I had a problem with our printer last week and had to reinstall it. Now when I go into the line drawing editor it gives me a message to make sure the printer setup is correct. I went to the file menu and clicked print setup but nothing came up. I tried printing but nothing is working. I can print fr...
- Thu, Aug 20 2009, 1:29PM
- Forum: Thermwood 3-Axis Machinery
- Topic: tool man print out
- Replies: 3
- Views: 3215
Re: tool man print out
Ryan,
Thanks for the reply. I will give that a shot, but I am thinking that making a Excel file with all the tools even if I have to write them down and bring them in the office. Taking a screen shot of all 40 tools would take some time.
Zach
Thanks for the reply. I will give that a shot, but I am thinking that making a Excel file with all the tools even if I have to write them down and bring them in the office. Taking a screen shot of all 40 tools would take some time.
Zach
- Thu, Aug 20 2009, 11:33AM
- Forum: Thermwood 3-Axis Machinery
- Topic: tool man print out
- Replies: 3
- Views: 3215
tool man print out
Is there a way to print my list of tooling from the tool manager? Whenever I am in the office or at home on my laptop it would be nice to have my list of tools and their settings for making dxf files.
Thanks,
Zach
Thanks,
Zach
- Thu, Jun 04 2009, 10:07AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Machining honeycomb core panels
- Replies: 1
- Views: 2662
Re: Machining honeycomb core panels
Dan, I machined some honeycomb a couple years ago that was 3.5" thick. It had 1/2" thick plywood for the skins. I purchased a 1/2" bit with 4" cutting length from a local supplier. I cut in two passes (about 1/2 way for each pass if I remember straight. It cut fine but was very l...
- Wed, May 27 2009, 4:26PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Cad drawings of machine
- Replies: 3
- Views: 6263
Re: Cad drawings of machine
Ryan,
Thanks for the drawings they made it easier to adjust the position of the machine with the conveyors so I could get an exact layout.
Zach
Thanks for the drawings they made it easier to adjust the position of the machine with the conveyors so I could get an exact layout.
Zach
- Tue, May 26 2009, 3:47PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Cad drawings of machine
- Replies: 3
- Views: 6263
Cad drawings of machine
Thermwood,
Do you have any dxf drawings for a C40 4x8 machine. We are reorganizing and laying out our shop for better efficiency. I saw the dimensional drawings on the site, I was looking for a scaled drawing that I can drag around to find the best fit.
Zach
Do you have any dxf drawings for a C40 4x8 machine. We are reorganizing and laying out our shop for better efficiency. I saw the dimensional drawings on the site, I was looking for a scaled drawing that I can drag around to find the best fit.
Zach
- Sat, Mar 14 2009, 5:39PM
- Forum: Thermwood 3-Axis Machinery
- Topic: 3cm Solid Surface Material
- Replies: 8
- Views: 7551
Re: 3cm Solid Surface Material
Kieth, I just tried a 3/8 2-flute rougher/finisher bit with chipbreakers. I ran it at 18000 rpm and about 200ipm in three step passes of approximately .4 each pass. The cut quality was pretty good. We had a small seam that all we did was sanded a little with a block and glued. No matter what bit I h...
- Fri, Mar 06 2009, 4:06PM
- Forum: Thermwood 3-Axis Machinery
- Topic: 3cm Solid Surface Material
- Replies: 8
- Views: 7551
Re: 3cm Solid Surface Material
We have been cutting the 3cm Affinity and EOS brand solid surfaces with and 3/8 Onsrud spiral O-flute bit. I would estimate that we get between 15-20 sheets per bit at about 150in/min. I was checking on The Fabrication Network forum and these guys were talking about cutting the 3cm with a bit Pinske...
- Wed, Jan 28 2009, 10:54PM
- Forum: Thermwood 3-Axis Machinery
- Topic: One Part, More than one Edgebanding, Slab Doors too
- Replies: 7
- Views: 6561
Re: One Part, More than one Edgebanding, Slab Doors too
I am cutting a job right now with slab doors and the labels have no picture.
I would also like to see different EB materials on the same label.
Zach
I would also like to see different EB materials on the same label.
Zach
- Fri, Jan 23 2009, 5:20PM
- Forum: Customer Tools
- Topic: Bar Rail
- Replies: 7
- Views: 23661
Re: Bar Rail
Kerry and Brian,
I checked the dxf file and it seems to be all arches and straight lines. I posted the dxf in the ecabinets forum if you want to take a look at it.
Zach
I checked the dxf file and it seems to be all arches and straight lines. I posted the dxf in the ecabinets forum if you want to take a look at it.
Zach