Thermwood / eCabinet Systems

Morning Neville I agree, drilling the holes on a hinge drill machine is far quicker. But if you only have one machine and a client of yours using a different hinge than your machine is set-up, then you want maybe to drill the client doors on the cnc machine rather to go and setup the hinge drill and...

Good morning I hope I can help you with some useful information. Your code read something like this: SET ZSHIFT=18.0000+WASTEBOARD [ADJFIXOFF, 1, -2440.0001] [ADJFIXOFF, 2, -2050.0001] G52L3 If you stand behind you table facing the gantry then your Home of the machine is on you left hand side and yo...

Good morning A while ago we did a job and all the doors where PVC pressed doors so we did not make them ourselves, but the hole house had finger pulls, and that we had to cut-out. What I did , I go to E-cabinets made a part that looks and is just as big as the finger pull with the cut-out. Go to con...

Good morning
I like the letter block program and want to use, But our machine is in metric, now what? Must i just insert a G70 somewhere?
What about the wasteboard thickness?
Will the program run with our machine? (Winxp, C40)
thanks

SOUTH AFRICA 30 NEW ZEALAND 28 GO BOKKE! Does anybody here use Bobcad v21 or v22 with success with a Thermwood machine? Will it be a better substitute to PM? I have Bobcad v21 but never took the time to learn it. They are selling V22(it includes Bobart X) pro now for $500, but I want to know for su...

Good morning from a chilly South Africa I have created a part with Ecabinets, write .twd file and load it in PM. I verify all regions with success, then write the code, all well. But if you take a look at the code it read something like this ".....region 2 bottom........G00 X789 Y18...G00 Z10 G...

The same thing happen to me over and over untill I have figure it out. If I load a full sheet I put my labels on the top left hand corner, then everything works right(the edging and the flip-ops). But if I add a sheet or sheets, and stick the label on the top left corner then it show the edging on t...

Morning Jason Tried to send you an e-mail but it came back undelivered. Our machine number is : C40-482. I hope this is the number you are looking for. Another things is that our control version (THM version) is 6.0.8.2. How to we upgrade to version 6.1.0.3 or higher, the reason for this is that I w...

Jason, Good afternoon I have taken photos of what out machine do, or so to speak does wrong. You can see it with the naked eye, like in the photos, when it cut dados horizontal across the table and it is then when the table has to move over that little bit, then it seems to be spring loaded it jumps...

hello Daniel
We all here use eCabinets to create the TWD files. You talk about "lash" and that I must look to see how much. How do i do that? (for example on table axis, to see how lash it have) Our machine will be 2 years old in August.
Thankx for the reply

Good afternoon I have a problem with our machine and that is when it accelerate and de-accelerate the table stutter. When we cut something with a small arc it looks like i have cut it with a jigsaw (freehand). Now I have stumble apon something in the manual. If you do a Ctrl + T then I get the follo...

The motherboard inside our machine had died 2 days ago, so they send us a new one from Johannesburg and i replace it with the new now (identical). I fire up the control and everything works perfect, except the two usb ports on the side does not work. In device manager under usb controller i get the ...

Good morning Damm website, this is the second time I write this message, keeps on logging me out, and when I hit submit takes me to loggin screen. Want to know if you can code in AFL to open a .txt or .cnc file and search for a target string like \"Locate MDF\" and have the program return ...

Good morning What i basiclly trying to do is cut out some letters and numbers on the CNC machine for our company name for outside. Now if you use the text \"editor\" and design the letters in AutoCad it simply does not work at all (even after i set up all the right layer name and thickness...

Good afternoon
I did a drawing with Autocad R14 that I want to cut out, but Control Nesting does not want to see the outlines that I have made with Sphere's and Splines, is that normal or is it just me?

Thanks