Thermwood / eCabinet Systems

Same results trying a 'standard' Ecab box and not my go to Seed Cab. This seems like a fairly common operation not to be noticed by now. Wondering if my software might need repair?

Tried it on a fresh cab. Same issue. Drawer fronts overlap one another when going from door/drawer front editor back into main cab editor.

Anyone experience problems with drawer fronts holding their reveal when exiting the door/ drawer editor? I have ben trying to get this cabinet to take a 7" high drawer front at the top of the three partitioned spaces. Drawers fronts will install fine but will jack up when returning to main edit...

Found it!
Very stupid. I had 'Straight Line' selected somehow and not true shape. Answer was staring at me.

Tim

Having an issue between two computers and within a computer with nesting in Ecab link. I have Link software on my design computer that I will drop TWD files into and be able to print off labels and reports from office printer. I'll also use the Link to get a dead accurate material takeoff from the n...

Thanks Tim,

I'll try fiddling with the Link settings some more to see if I can get it to nest. Much appreciated.

Tim

Hi All, STILL having trouble with the back of the larger cabinet from this assembly nesting in Ecab Link. It will now nest in Ecabs but gets spit out in the link nest. Would anyone be able to take a look at what may be causing this issue? I'm using a .25" collar and cutting with .25" M.C. ...

Thanks Guys,
Looks like I'll have to get Excel.

Dennis,
I assume that is what your calculator works in?

Tim

Anyone figure out how to get this done for a cabinet having 3 doors. My usual workaround is to take it into cad and draw a quick horizontal cut to get partition spacing. I use that to locate the partition in ecabs and ignore what the software has spit out for door widths, relying on cad drawing for ...

Wow, I stared at the answer twice and still read it wrong. My eyes must be composting with age. Thanks you Joe and Rick. Much appreciated

Hi Joe, Yes it is. I was working under the assumption that if the material has no grain orientation then the nest would put the rectangle shapes inside the material rectangle, going large to small rectangles, in the most efficient way. Also, the .77 MDF material won't nest at all. AGain, no grain an...

Would anyone know why the .77 MDF material in this batch of cabinets won't nest? I've looked at the material specs; no grain, 97" x 49", etc and can see no reason why it will not nest. Likewise the storage cabinets' back will not nest although it's 46.5L in one direction and 68.55" wi...

Thanks Scott!

Would anyone be able to remind me if there is a way to change the width of the angled (center) back of the 90 degree corner cab? If it can be eliminated at all?

Thanks,
Tim

Hi all, Just wondering if anyone else is experiencing issues when taking a cabinet previously saved cabinet back into drawer/door front box editor and deleting/reinstalling a drawer front (with box), there's a 50/50 chance that the drawer front will size correctly and in the right location. This is ...