Search found 431 matches
- Mon, May 04 2009, 6:01PM
- Forum: eCabinet Systems Software
- Topic: Better way to build cabinet?
- Replies: 6
- Views: 4699
Better way to build cabinet?
I'm redoing my closet library, and will be basing it on the cabinet attached below. The last time around I used color coded edgeband to distinguish certain parts (finished vs unfinished ends, fixed vs. adjustable shelves etc.) but am going to do without edgeband on these. The edgebanding seems to sl...
- Sun, Apr 26 2009, 6:19PM
- Forum: eCabinet Systems Software
- Topic: Top not Cutlisting Correctly/ RTA Fitting
- Replies: 3
- Views: 3545
Re: Top not Cutlisting Correctly/ RTA Fitting
Thanks Chris. I'll play around with the notch and holes and see if that's tied into the error. In the meantime, I removed the banding from the front edge of the top, and set the top back, from the front of the cabinet, the thickness of the banding. This works, but isn't ideal. In the meantime, if ot...
- Sat, Apr 25 2009, 2:58PM
- Forum: eCabinet Systems Software
- Topic: Updating Hole Pattern
- Replies: 0
- Views: 2083
Updating Hole Pattern
I've adjusted the hole pattern associated with the RTA fitting I'm using. What's the easiest way to apply this change to the cabinets in my library?
- Thu, Apr 23 2009, 7:01PM
- Forum: eCabinet Systems Software
- Topic: Top not Cutlisting Correctly/ RTA Fitting
- Replies: 3
- Views: 3545
Top not Cutlisting Correctly/ RTA Fitting
When I add RTA fittings to the top of my cabinet 2 things are happening. The top disappears from the cutlist, and when nested, the thickness of the edgebanding is no longer subtracted from the part. I've tried deleting the part, and recreating it, but keep getting the same results. GCMF - 11 - 2 - 1...
- Mon, Apr 20 2009, 8:43PM
- Forum: eCabinet Systems Software
- Topic: Selecting Multiple Objects in PE
- Replies: 9
- Views: 7187
Re: Selecting Multiple Objects in PE
Much easier than what I've been doing. Looking forward to trying that tommorrow.
- Mon, Apr 20 2009, 4:56PM
- Forum: eCabinet Systems Software
- Topic: Edgeband not Subtracted from Part Size
- Replies: 6
- Views: 4638
Re: Edgeband not Subtracted from Part Size
Anyone know what might be causing this?
- Mon, Apr 20 2009, 4:40PM
- Forum: eCabinet Systems Software
- Topic: Unable to Delete Shape in Part Editor
- Replies: 6
- Views: 6176
Re: Unable to Delete Shape in Part Editor
John, I just tried that and it works great. Not clear on why I didn't try to use it before. Thanks.
- Mon, Apr 20 2009, 4:34PM
- Forum: eCabinet Systems Software
- Topic: Unable to Create Pocket in Part Editor
- Replies: 4
- Views: 4583
Re: Unable to Create Pocket in Part Editor
Thanks Jerry, that's what I ended up doing. I need to create this hole and notch pattern on quite a few cabinet sides, so I was hoping to do it as a DXF, that I could bring into PE each time. I was able to do it with the holes, but not the notch. It does turn out to be pretty easy just to create the...
- Mon, Apr 20 2009, 4:04PM
- Forum: eCabinet Systems Software
- Topic: Selecting Multiple Objects in PE
- Replies: 9
- Views: 7187
Re: Selecting Multiple Objects in PE
Thanks guys. It does look like I'll need to select them one at a time. The patterns are generally 2 rows of shelf holes, top to bottom. The hitch is that each opening has several adjustable shelves. From what I could tell, the only way to do this, within the program, was to position each shelf at ju...
- Sun, Apr 19 2009, 11:20AM
- Forum: eCabinet Systems Software
- Topic: Edgeband not Subtracted from Part Size
- Replies: 6
- Views: 4638
Re: Edgeband not Subtracted from Part Size
Corrected the length of the fixed shelf - values for left and right inset weren't set at 0. (Sorry on that, I'm new to the program.
The top still isn't showing up on the cut list...
The top still isn't showing up on the cut list...
- Sun, Apr 19 2009, 11:12AM
- Forum: eCabinet Systems Software
- Topic: Edgeband not Subtracted from Part Size
- Replies: 6
- Views: 4638
Re: Edgeband not Subtracted from Part Size
Or the cutlist, which doesn't seem to include the top, and is showing, what I'm guessing is the middle (fixed) shelf as 568.82mm H instead of 572mm.
I've read of the issue of the RTA fittings (some show up as red, some blue). I'm guessing its may be causing the other issues?
I've read of the issue of the RTA fittings (some show up as red, some blue). I'm guessing its may be causing the other issues?
- Sun, Apr 19 2009, 10:45AM
- Forum: eCabinet Systems Software
- Topic: Edgeband not Subtracted from Part Size
- Replies: 6
- Views: 4638
Re: Edgeband not Subtracted from Part Size
This is what I end up when I nest that cabinet. The top and deck should be the same, both are edgebanded on the front edge only (.5mm EB).
- Sun, Apr 19 2009, 7:57AM
- Forum: eCabinet Systems Software
- Topic: Edgeband not Subtracted from Part Size
- Replies: 6
- Views: 4638
Edgeband not Subtracted from Part Size
On the cabinet in the file below, when I add an RTA fitting to the top, and nest, it doesn't seem to be subtracting for the EB on the front edge of the top. When I first added the part, and added edgebanding, before selecting the RTA construction, the part size was coming out ok. It was only after a...
- Sat, Apr 18 2009, 9:06PM
- Forum: eCabinet Systems Software
- Topic: Unable to Edgeband Part
- Replies: 6
- Views: 5527
Re: Unable to Edgeband Part
Damon, thanks for the fix. -Nat
- Sat, Apr 18 2009, 8:02PM
- Forum: eCabinet Systems Software
- Topic: Unable to Edgeband Part
- Replies: 6
- Views: 5527
Re: Unable to Edgeband Part
When I nest that same cabinet, it doesn't seem to subtract for the edgebanding on the front edge of the top...