Search found 355 matches
- Tue, Jun 12 2012, 7:25AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Wasteboard question
- Replies: 6
- Views: 6636
Re: Wasteboard question
Here's something you'll like to hear. You can change the lower limit of your wateboard and tableboard thickness. Go into your "C:\system" directory and find the file called "THM.INI". This file shoud open in a text editor like notepad. serach for the variables "MinTableboard...
- Thu, May 31 2012, 7:13AM
- Forum: Thermwood 3-Axis Machinery
- Topic: CN 5.71 jobs undersize by 20mm!!!!!!!!!!!!
- Replies: 7
- Views: 6411
Re: CN 5.71 jobs undersize by 20mm!!!!!!!!!!!!
We will need your export file from Control Nesting also. Please email this file to program@thermwood.com along with your contact information and reference to this forum posting. Thank you.
- Tue, May 29 2012, 8:50AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Version 5.05 Controller
- Replies: 2
- Views: 3947
Re: Version 5.05 Controller
Version 5.59 Patch 2 can be installed on THM version 5.05. You will not be able to install any version higher than that unless you upgrade the controller.
- Tue, May 29 2012, 8:18AM
- Forum: Thermwood 3-Axis Machinery
- Topic: DXF Clean Up tool Problem
- Replies: 3
- Views: 4063
Re: DXF Clean Up tool Problem
When Control Nesting is given an operation it checks the tooling list starting with the operation 1 tool then going down the list until it finds a tool it can use. If it goes through the operations list and does not find a tool it can use, it then passes the operation to the pocketing routine. This ...
- Fri, May 25 2012, 8:22AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Auto tool measure problem after updating control
- Replies: 2
- Views: 3275
Re: Auto tool measure problem after updating control
It sounds like your sensor needs to be cleaned. You can take the sensor apart and clean any saw dust out of it y removing the 3 screws that holds the top pad on. Having the router move upwards instead of downwards is what usually happens when the sensor gets dirty and no longer has a closed contact ...
- Fri, May 04 2012, 10:30AM
- Forum: Thermwood 3-Axis Machinery
- Topic: CN 5.71 RAMP IN area not being cleaned out
- Replies: 8
- Views: 8471
Re: CN 5.71 RAMP IN area not being cleaned out
I was able to reproduce the issue now that I have seen the code you produced. When we tested the issue here, we were testing on version 7 and higher THM software. After seeing your code, I wrote the code for version 6 THM software and was able to reproduce the error. I have informed our software eng...
- Thu, May 03 2012, 7:15AM
- Forum: Thermwood 3-Axis Machinery
- Topic: CN 5.71 RAMP IN area not being cleaned out
- Replies: 8
- Views: 8471
Re: CN 5.71 RAMP IN area not being cleaned out
Mohan, I did test this the first time you sent me the file and I was not able to reproduce the issue as I stated in the email. Who did you send the files to the second time? If you have this happen again, send the CNC file along with the export to program@thermwood.com and someone will look into it ...
- Tue, May 01 2012, 7:45AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Cut through depth added to chain
- Replies: 6
- Views: 6561
Re: Cut through depth added to chain
I never received the files requested. Please send the most recent files to program@thermwood.com along with information on the issue. This way, if I am not the tech that looks at it, they will know what they are looking for.
- Tue, May 01 2012, 7:41AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Fixture offsets / flip operations
- Replies: 2
- Views: 4830
Re: Fixture offsets / flip operations
Your Fixture offset is not set correctly. If you perform flip operations first and then flip the whole sheet and it is not correct on the y axis, then you need to change your fixture offset by half the error. If you are flipping the parts one at a time, you will need to change the offset by the valu...
- Tue, May 01 2012, 7:33AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Blue Screen
- Replies: 1
- Views: 2620
Re: Blue Screen
Contact CNC Automation for assistance. They should be able to properly diagnose your issue.
- Wed, Apr 18 2012, 7:18AM
- Forum: Thermwood 3-Axis Machinery
- Topic: CN 5.71 RAMP IN area not being cleaned out
- Replies: 8
- Views: 8471
Re: CN 5.71 RAMP IN area not being cleaned out
Please send us your TWD file and your machine export to program@thermwood.com so we can test and verify the issue. Please make sure to add your contact information in the email.
- Wed, Apr 18 2012, 7:15AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Turning off vacume pumps
- Replies: 6
- Views: 5894
Re: Turning off vacume pumps
Our retrofit department should be able to discuss with you what you are wanting. If you want just on and off switches at the controller, or if you want the pump to be automated by adding code into the program to turn it on and off automatically.
- Wed, Apr 18 2012, 7:11AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Control Nesting crash after update
- Replies: 3
- Views: 4070
Re: Control Nesting crash after update
Marius, Go to the website and download 5.59 patch 2. There was an issue with patch 1.
- Mon, Apr 16 2012, 9:05AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Question about applyed carvings
- Replies: 1
- Views: 2694
Re: Question about applyed carvings
Scott, You will have to install the carving files on both the machine and the computer running ecabinets. If your machine does not have the carving libraries on it already, you will have to install the carving library utility first. Go to the page listed below and click where it says "CLICK HER...
- Wed, Apr 11 2012, 7:42AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Label Printing from CN
- Replies: 4
- Views: 4923
Re: Label Printing from CN
There is only one label file (30252_Address_SINGLESHEET.RPT) that allows you to print the labels for each sheet as it is cutting and it is only available in Control Nesting version 5.69 and higher. If you are not using this RPT file, then it will print all of them at once and there is no way to stop...