Thermwood / eCabinet Systems

Duane,

Why not have a design request service? If someone need something done they can post requirements or scketches and we can do the design...

Joe... Here is a picture of what I am talking about...I get the issue with the edge profile on the drawers but the inner profile, groove or bead or whatever we call it... is not nesting or showing up on the G-code after the TWD file is run... I will hopefullyt be doing MDF doors here shortly..this i...

are the dovetails on a drawer box front treated the same way as a profile? is that perhaps why they do not show up either?

Thanks again joe

I was hoping to do a trial run with some d-fronts tommorow and noticed that the dovetails do not show up on the d-box front #s 12 and 2 on the nesting diagram....

I can get the drawer front to nest but the profile does not show up on the nest...

here is what I came up with real quick, maybe you could piece together an assembly or something then lay it in there....I was thinking you could probably cut the pattern out of a display cube pretty quickly also....

or boards?

did you try using display panels?

so if you use manual hold downs(toggles) I assume they are located way out of the cutting area...

When you screw the boardstock through the spoil board how do you locate the screws...reference getting the board laid out on the cnc correctly...

thanks

Is there a good book for using the profile modeler and CNC operations together(reference my last post)?

Is there a consensus on the best way to hold board stock down on a CNC? for carvngs and or relief profiles like fluting?

Thanks

If someone wants to cut this give me an email...
[/img]

apart from cutting the holes in the parts editor and generating a display item....I am not sure

How are the custom carvings generatd with e-cabs...is this something we can do in e-cabs or in another software and then import?

Thanks,

I will give it a shot

Roger