Search found 681 matches

by Scott G Vaal
Wed, Apr 22 2015, 2:09PM
Forum: eCabinet Systems Software
Topic: Is there a way?
Replies: 3
Views: 4909

Re: Is there a way?

Don, You can set face frame construction and its Mortise/Tenon Setting directly from the Global Settings tab in construction settings. Is this what you asking for? FYI: Mortise/Tenon FF construction will only turn on for board stock face frame material (if the ff material is set to sheet stock, you ...
by Scott G Vaal
Wed, Apr 22 2015, 11:09AM
Forum: eCabinet Systems Software
Topic: Can't open program
Replies: 1
Views: 2762

Re: Can't open program

Dave,

View this post and see if it can resolve your issue.
http://www.thermwood.com/forums/viewtop ... =3&t=12418
by Scott G Vaal
Wed, Apr 22 2015, 11:01AM
Forum: eCabinet Systems Software
Topic: Misaligned Crown molding
Replies: 4
Views: 5317

Re: Misaligned Crown molding

Leo,

If you need it for looks, then yes, your best option is a display molding. If you did not need it for looks, it is the correct size already, just positioned over by the face frame scribe.
by Scott G Vaal
Wed, Apr 22 2015, 8:53AM
Forum: eCabinet Systems Software
Topic: Misaligned Crown molding
Replies: 4
Views: 5317

Re: Misaligned Crown molding

Leo,

Can you post the cabinet so I can see the exact situation.
by Scott G Vaal
Wed, Apr 22 2015, 8:46AM
Forum: eCabinet Systems Software
Topic: Hinge plate holes in framed cabinet
Replies: 4
Views: 5206

Re: Hinge plate holes in framed cabinet

Jim, The reason you are seeing this is because your cabinet is a face framed cabinet but you are sort of wanting it to be a hybrid between face framed and frame-less. Hole patterns on a framed cabinet locate themselves from the inner openings of the face frame components. Now, when a component is re...
by Scott G Vaal
Tue, Apr 21 2015, 10:39AM
Forum: eCabinet Systems Software
Topic: Two piecing large parts
Replies: 5
Views: 4755

Re: Two piecing large parts

Jamie, Here is a new version of your cabinet with two stretchers instead of a back. I inset the top, deck, shelves, and partitions using f(x) by the thickness of the left end (since it is the same material as the back). Then, I added a stretcher from the left end to the far right partition and anoth...
by Scott G Vaal
Wed, Apr 15 2015, 10:59AM
Forum: Thermwood 3-Axis Machinery
Topic: Partitions with 100% dado
Replies: 4
Views: 7057

Re: Partitions with 100% dado

Gentlemen, Ok, this is a metric only issue. We have discovered that the dado extension values are being applied, but are getting converted incorrectly when in metric (this is only for dados that get machined via pocketing). In your case Jeremy it is only extending by about .74mm when it should be ab...
by Scott G Vaal
Tue, Apr 14 2015, 1:41PM
Forum: eCabinet Systems Software
Topic: Noticed something in new build
Replies: 6
Views: 5059

Re: Noticed something in new build

Don, Thanks for the job, it allowed me to reproduce what you were seeing. It appears to require the items to be associated to, but not physically touching, and on the back side of the wall. We will get it on the list and get it resolved. However, for now you can simply build your wall with the build...
by Scott G Vaal
Tue, Apr 14 2015, 10:53AM
Forum: eCabinet Systems Software
Topic: Noticed something in new build
Replies: 6
Views: 5059

Re: Noticed something in new build

Don,

You can mail it to cabinets@thermwood.com if your email will handle it. Put Attn: Scott V in the subject line if you send it.
by Scott G Vaal
Tue, Mar 31 2015, 1:53PM
Forum: eCabinet Systems Software
Topic: TWD File Name
Replies: 4
Views: 5004

Re: TWD File Name

Gentlemen,

This got inadvertently changed in the latest version. We will get it resolved as soon as we can. Sorry for the inconvenience.
by Scott G Vaal
Tue, Mar 31 2015, 12:24PM
Forum: eCabinet Systems Software
Topic: Adjustable shelf hole location relavent to shelf material
Replies: 2
Views: 3666

Re: Adjustable shelf hole location relavent to shelf materia

Gentlemen,

This issue is documented and we will resolve it as soon as we can. Sorry for the inconvenience.
by Scott G Vaal
Thu, Mar 26 2015, 3:31PM
Forum: eCabinet Systems Software
Topic: Door/Drawer editor question
Replies: 1
Views: 2334

Re: Door/Drawer editor question

Donald,

No, the grain rotation is only for sheet stock slab doors and drawer fronts (doors or drawers saved as a slab type).
by Scott G Vaal
Sat, Mar 21 2015, 12:01PM
Forum: eCabinet Systems Software
Topic: Problems in latest Version Build 16
Replies: 5
Views: 5356

Re: Problems in latest Version Build 16

Bill, Please post a job with concise steps that will reproduce what you are seeing and we will look into it. I have tried several things and cannot reproduce it at this time. So hopefully if you get us your scenario, we can get you an answer. If you would rather not post the job here, you can send i...
by Scott G Vaal
Wed, Mar 18 2015, 4:13PM
Forum: eCabinet Systems Software
Topic: phantom gable
Replies: 5
Views: 7004

Re: phantom gable

Steve, At this time we are unaware of any current issues that may cause this double part scenario. If you were to have it happen from a cabinet known to be good, please let us know your steps (or any info you can give us about it). If we can reproduce it, we can fix it. If I become aware of a path f...
by Scott G Vaal
Wed, Mar 18 2015, 1:15PM
Forum: eCabinet Systems Software
Topic: phantom gable
Replies: 5
Views: 7004

Re: phantom gable

Steve, Is this the only cabinet that you see this issue with? Is this a cabinet you use a lot? I am not sure how it got this way, but viewing the internal history of this cabinet shows it goes way back to Sept 28, 2006 with Version 5.0 Bld 10. At this point I would suggest that you try to fix it or ...