Thermwood / eCabinet Systems

Yes you can change the complete job materials all at once (right click - Change materials ) and save in a different name without losing the first one. Also you can change all the doors and drawer fronts in right sidebar -Adjust cabinet features.

Also make sure that your Place Cabinet is set to FREE STYLE.

Find your Thermwood file on your computer and then the Ecabs file and then your JOB file. It should end in ESJ. Copy this file to a flash drive and then put it in your Themwood - Ecabs - JOB file on your laptop. Then it should open on the laptop. I'm not sure if the different OP systems will affect ...

I'm not Mark but if you use the PRINT SCREEN button on your keypad and then PASTE it to a photo editor like IRFANVIEW (you can download for free) and then you can do what ever you like with the picture.

It most likely is your software but if you want a work around just bring up your Cut List and the Out source doors will be at the bottom. Copy and Paste to your Notepad and then edit as you like. Just a suggestion.

Is there any way to do an angled/sloped shelf? You're probably looking for something like this-- JoDa1.jpg I can't open the file now as it was done in an early version but I didn't move any holes -- I just used the next higher back hole and notched the front underside of the shelf so it wouldn't sl...

Steven Daws wrote:It has a 20mm overhang and its flush at the back so you would see the front edge as 40mm even if it was in the cab.

Have you tried in elevation view to move the CT up and see if it is the right thickness??

Wally How did your Project come out ? Actually -- it sprays really quite nice. It's a little more fussy than NC Lac but enhances the grain & stain nicely and flows out to a real smooth finish. I don't know if I will switch yet but my buddy who does it for a hobby can now spray in his garage sho...

Thanks for the replies Guys!! I am going to test it tomorrow.

Can anyone tell me how ML Campbell's Water Based Aqualente stacks up against the other newer WB finishes?? TIA.

Thanks Kerry -- I have downloaded the pulls before but never got all those. I must have picked the wrong one. Yours worked quite nicely.

Thanks Kerry!! That will work just fine. I have nothing under Hafele in my pulls -- where do you get them. Here's wishing you and your's a very Merry Xmas and a prosperous New Year!!

Is this not possible?? The customer really wants to see the dresser with a similar hardware.
Thanks

Hey guys -- how do I get a pull like this into my program ?? Where would I get an STL of this or one like it?? TIA.

It does say build 8 when it updating but when it's finished it will say build 9.