Thermwood / eCabinet Systems

Here is a jpeg of the cabinet.

Sorry wrong message title but the question still needs to be solved.

I would like to cut dados in the rear stretcher legs for the 1/2" back. Ecabs only allows me a front and rear view so I can't use any kind of straight cutter. I have done it using a slot cutting bit and the profile edge option but that performs a cut down the entire length of the piece and I ne...

The "advanced" settings are to associate the inset to a part. I always try to set things up with "0" insets. So for example is I want a stretcher flush to the front of a cabinet I will go to advance settings and set inset #3 to left end/front or right end/front and click okay. No...

Everytime I toggle between main view and LDE I have to reset my printer set up specs. Is there anyway to lock these.

Is it possible to change the direction of cabinet backs so if I have a cabinet that is 40" tall and 95" wide I can install the back accordingly so as not to have a seam. I see that I can manipulate the grain direction but doesn't change the width and length specs.

You can use a stretcher. For example if you have a cabinet that requires a wider/longer back than a piece of sheet stock. Replace the back with two stretchers or give the back an inset that will size it under the max sheet size and add a stretcher for the remaining opening.

The "pulls" library from ecabs is really dated. Would really like to display some modern 6/8/12" contemporary pulls. Anyway to achieve this?

There is a setting for adding a center row under Add Shelf settings using the apply shelf hole settings Yes, but I don't believe you can specify the location from the front or back edge. It only palces the holes centered between the front and rear holes. I also don't know what the "single row ...

Thank You all for the help.

Closet project where it is necessary to drill three rows of holes. How do i set up for the center row (for adjustable hanging rod) at a specific distance from the front (or it could be referenced from the back) edge. I would also like to drill uprights that do not actualy contain adjustable shelves....

Scott I had no issues updating. You could try turning off your firewall.

Yes, same issue here

Yes, as tim said, you must associate all display parts to a cabinet. Click on and highlight the display part. Double click on the cabinet. Right click to access the drop down menu and click on associate to cabinet.

Thanks Scott. I'll start experimenting with workarounds.