Thermwood / eCabinet Systems

Way old!! But ran across this while looking for something else. When we have issues with not squaring out the corners it is because we have to set the larger bit to leave stock.

Hi Fred, I just had some questions. What type of case work would it be? Face frame? (inset or overlay) Or European? Do you have existing libraries? Would this be mostly for the shop or just visuals for the customers?

For our cabinets we have our seed cabinets all melamine with lock dadoes drilling a pilot hole for a screw going all the way through. To date I have been just going to the KD's window selecting right edges and removing hardware. VOILA! However, this leaves our tenon to far back from the front and ba...

Do you mean for lazer engraving?

We are a medium shop (15 employees) and do a fair amount of custom stuff. Example: for a painted cabinet with a face frame we put a stretcher in front and run a 1/8" toolpass in it to create a face frame. So when the CNC guy nest the file there is nothing indicating there is a tool pass on the ...

Good job!

Not sure, I am guessing the reason it isn't allowed is the profile would usually get applied to an MDF or solid wood part and that wouldn't normally get edge banded.

Yes the pattern default changes but the actual hole pattern doesn't apply.

Hi I had several cabinets that needed a different slide pattern, I selected them and went through the Global Mods procedure. Now when I go into the cabinet the default slide is changed but I have to select the fronts and apply hardware. Is this how it is supposed to work or am I missing some check b...

The node you are speaking of are they the same as the ones that show up when you hit "M" on the key board? Or is it the "grid" on the room layout...

I have noticed if I angle them, if there is one dimension locked it causes problems.

Hi just noticed there was no "Thru" dado, kd etc. in the drawer box editor. Will we get those eventually? I like using them to avoid flip ops on the machine.

Just had a customer call about drawerbox sides being cut short. eCabinets has the drawer sides at 21" long. The cut list shows them at 21". I changed material thickness when creating the twd. The parts where cut at 18". Hope this helps. David, not sure if you are putting this out as ...

Hi everyone, we have been file sharing off a server since we started ecabinets 5 yrs ago. Just wondering if anyone is running ecabinets out of a server, there are some posts back on 08 that say it isn't possible. Has that changed? Or what is the following quote off of ecabinets website? "User D...

Thanks Brad and Clint. Also Ecabinets, great feature. The top one was a poly line the bottom was a spline.