Search found 436 matches
- Sat, Mar 25 2023, 8:00PM
- Forum: eCabinet Systems Software
- Topic: GLITCH in part editor for doors that are edged
- Replies: 8
- Views: 3710
Re: GLITCH in part editor for doors that are edged
Hi Nick I'm not sure whats going on there. I am putting the door into the doors, saved, slab file I just use the software, so I like you am just trying to reproduce your steps. I couldn't load your door as it was broken and I have attached the error messages. It still looks like a Constraints thing ...
- Fri, Mar 17 2023, 7:01AM
- Forum: eCabinet Systems Software
- Topic: Lock Dado with Centreline idea
- Replies: 2
- Views: 2072
Lock Dado with Centreline idea
There is a limit of 10 questions and we have 12 available joints, I left off the last available 2 KD / RTA fastener through and Lock dado through So I suppose list them down in the comments if you feel so inclined. Hi Guys We mainly use frame less cabinets with the Lock Dado setting and use a straig...
- Wed, Mar 15 2023, 7:26PM
- Forum: eCabinet Systems Software
- Topic: Toe board and notch
- Replies: 2
- Views: 2235
Re: Toe board and notch
I don't use face frames, so I am probably missing the point, but just a thought bump if you are stuck.
The setting in the attached picture seems to adjust that.
Same thickness as shelf material.
The setting in the attached picture seems to adjust that.
Same thickness as shelf material.
- Fri, Mar 10 2023, 1:31AM
- Forum: eCabinet Systems Software
- Topic: Island pharmacy cabinet open on both front and back
- Replies: 4
- Views: 2281
Re: Island pharmacy cabinet open on both front and back
Hi Sarah As in the replies above, there are probably as many ways to do this as there are ecab users. I made a little video which took about 30 minutes with interruptions and then I exceeded my free upload limit so I cut it by about 2 thirds and just put the last bit mainly in the part editor up. It...
- Tue, Mar 07 2023, 2:05AM
- Forum: eCabinet Systems Software
- Topic: Constraint manager bug?
- Replies: 3
- Views: 2377
Re: Constraint manager bug?
Hi Jeremy.
Yep, I am over constrainted as well using metric (127mm)
Yep, I am over constrainted as well using metric (127mm)
- Sun, Feb 26 2023, 8:41PM
- Forum: eCabinet Systems Software
- Topic: GLITCH in part editor for doors that are edged
- Replies: 8
- Views: 3710
Re: GLITCH in part editor for doors that are edged
Hi Nicholas. When I examined it in the part editor it seemed okay. When I zoom in I cant see that slit. (it does look like edging in your image) The door came into my ecabs unconstrained. Unless somebody else comes in with an answer, My two cents. I used to have a lot of problems with constraints. I...
- Wed, Feb 22 2023, 5:56PM
- Forum: eCabinet Systems Software
- Topic: GLITCH in part editor for doors that are edged
- Replies: 8
- Views: 3710
Re: GLITCH in part editor for doors that are edged
Hi Nicholas.
Perhaps if you post the cabinet we can understand better.
I cant fully follow your process or method thinking.
What is the slit?
Mark
Perhaps if you post the cabinet we can understand better.
I cant fully follow your process or method thinking.
What is the slit?
Mark
- Mon, Feb 06 2023, 1:30AM
- Forum: Customer Images
- Topic: Solid wood cabinetry made on a Model 42
- Replies: 1
- Views: 5215
Re: Solid wood cabinetry made on a Model 42
Beautiful work Scott. Always nice to see other peoples work and methodology. I was also a bit inspired by Kens ideology. I didn't read the book but he did a video or something and he mentioned something like with CNC machining we have to rethink the way we do joinery. I have always aspired to do tha...
- Thu, Feb 02 2023, 8:38PM
- Forum: Thermwood 3-Axis Machinery
- Topic: Nest rectangular. Edge Banding onn oposite side
- Replies: 4
- Views: 2949
Re: Nest rectangular. Edge Banding onn oposite side
Thanks Clint
- Thu, Feb 02 2023, 7:07AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Nest rectangular. Edge Banding onn oposite side
- Replies: 4
- Views: 2949
Re: Nest rectangular. Edge Banding onn oposite side
Hi Clint Thanks for the reply. Just sent those files Looked up Rectangular optimization as you suggested See the little window in the help menu that shows the nest closet to home and furthest from home for offall? You can call me dumb and blind, But I cant see that window? :? I know my nests were cl...
- Sat, Jan 28 2023, 6:18PM
- Forum: eCabinet Systems Software
- Topic: Line Drawing Editor Crashing
- Replies: 14
- Views: 4237
Re: Line Drawing Editor Crashing
I love my Ecabs :D But I don't use the line drawing editor. We have tried and tried to make it work for us, tried to become more proficient, tried to adjust to what we can do in there. But every time we just decide Its not as good as our old way and give up. The lady that helps me to do drawings jus...
- Fri, Jan 20 2023, 3:34AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Nest rectangular. Edge Banding onn oposite side
- Replies: 4
- Views: 2949
Nest rectangular. Edge Banding onn oposite side
Hi Guys. The rectangular nesting does appear to be more efficient. I've used the new nest rectangular optimizing a couple of times now. Both times the edging on the labels has printed on the opposite edge to which it is meant to go. Has anyone else encountered this? Two other things that seem to ups...
- Mon, Dec 19 2022, 8:18PM
- Forum: eCabinet Systems Software
- Topic: Constraints with lock Dado error
- Replies: 1
- Views: 1726
Re: Constraints with lock Dado error
Just another example
Change the cabinet width from 782mm to 630mm.
Works okay
Attempt to change it back to 800mm error message wants to revert to previous cabinet.
Change the cabinet width from 782mm to 630mm.
Works okay
Attempt to change it back to 800mm error message wants to revert to previous cabinet.
- Mon, Dec 19 2022, 7:41PM
- Forum: eCabinet Systems Software
- Topic: Constraints with lock Dado error
- Replies: 1
- Views: 1726
Constraints with lock Dado error
Can anyone else reproduce this? Standard base frame less. Control C Apply lock dado construction via global settings. Change KDA RTA's Take bottom shelf into part editor. Put a rectangular geometry onto the back edge overlapping the back edge. Pointer, Right click, Cut pocket using closed contour. C...
- Fri, Dec 09 2022, 4:54AM
- Forum: eCabinet Systems Software
- Topic: Magic Doors!
- Replies: 6
- Views: 2276
Re: Magic Doors!
Hi Stuart
I followed as best I could in metric and it seems okay with plain doors
Some thoughts, attach the cabinet so we can have a look at it.
Are they plain doors?
Do you have constraints on the doors? That was messing with placement of some doors I was trying to attach to a cabinet.
I followed as best I could in metric and it seems okay with plain doors
Some thoughts, attach the cabinet so we can have a look at it.
Are they plain doors?
Do you have constraints on the doors? That was messing with placement of some doors I was trying to attach to a cabinet.