Thermwood / eCabinet Systems

This is what I have found so far. It you delete the top drawer w/ drawer box. The puzzle joint dados reappears. You readd the drawer w/ drawer box with the default settings. They go away again. If I regen the cabinet and check the size of the drawer boxes and the top drawer box is taller than the bo...

This is the result of saved cabinet in a older version (happened with cabs with detached toes). The cabinet height was saved wrong. When you click on the cabinet in Load dialog, you see the height was 26.5\". However when you load the cabinet in cabe ditor, you see the height is 32\". Resa...

Please provide the exact steps that you are doing to cause this. Attach any job or cabinet(s) that you are using as well. The more detail you can give the better. Screen shot are nice, but most of the time dont tell the whole story. Example Steps 1. Open ecabinets 2. load XXX job 4. press JPG button...

I think the performance testing for the video cards was based on HOOPS performance, and not the LightWorks performance. All the 3D rendering in eCabinets is done via HOOPS api. The 2D Presentation rendering is done via LightWorks api.

For settings to be changed on mid stiles and rails, you have to select them in the face frame editor (they highlight green). Hold down the control key to select multiple stiles/rails. Then go to construction settings and change the face frame width. This method also works with shelves and partitions...

1. go the Face frame editor
2. select mid rail and stile
3. go to face frame construction settings, change the mid rail/stile material
4. hit ok

What OS are you running on each machine? Is one 32-bit and one 64-bit?

This is a known issue. Some people have already noticed it with detached toes. It will be fixed in the next patch. However, to fix the issues you will need to resave each cabinet.

eCabinet Systems only works that way with *.esj files. you can not do that with *.esa or *.hsf files.

Is your move Increment 0\"?

yes, this is correct. Just FYI, this problems only happens on assemblies.

Should be fixed up in next patch (in beta now). You will have to delete any offending countertops and readd them.

If the cabinet is on a wall, you can associate the countertop to the wall, then add the wall to the line drawning editor.

Thanks

It be nice if someone would post a cabinet or job that this is happening with. JPGs are nice eyecandy, but they dont tell me what the problem is.