Justin,
Is the material single sided perhaps?
Forrest
Search found 800 matches
- Tue, Mar 06 2007, 2:50PM
- Forum: eCabinet Systems Software
- Topic: KD/RTA Back
- Replies: 10
- Views: 7982
- Fri, Mar 02 2007, 1:22PM
- Forum: eCabinet Systems Software
- Topic: Veneer sheet quick cutting list/diagram/yield wanted
- Replies: 4
- Views: 4398
- Fri, Mar 02 2007, 8:49AM
- Forum: Thermwood 3-Axis Machinery
- Topic: how do I cut this piece on the router?
- Replies: 26
- Views: 20529
- Wed, Feb 28 2007, 7:26AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Dumb Door Routing question...
- Replies: 12
- Views: 7553
- Tue, Feb 20 2007, 8:35AM
- Forum: eCabinet Systems Software
- Topic: Upper corner frameless
- Replies: 9
- Views: 7393
- Mon, Feb 19 2007, 6:40PM
- Forum: eCabinet Systems Software
- Topic: Upper corner frameless
- Replies: 9
- Views: 7393
- Wed, Feb 14 2007, 8:32AM
- Forum: Thermwood 3-Axis Machinery
- Topic: What dovetail setting ?
- Replies: 3
- Views: 3403
- Wed, Feb 07 2007, 10:12AM
- Forum: Thermwood 3-Axis Machinery
- Topic: collet
- Replies: 5
- Views: 5276
Mark, I forgot to address one other thing you mentioned. You should maybe once a week take the tools out and blow out the collet and reset. Over time these tools can loosen if left to long. The wrench is just like what you buy for auto use but has the special end on it. Its a little pricey but will ...
- Wed, Feb 07 2007, 9:54AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Cutting speed
- Replies: 6
- Views: 7699
- Wed, Feb 07 2007, 9:39AM
- Forum: Thermwood 3-Axis Machinery
- Topic: collet
- Replies: 5
- Views: 5276
Mark, I don't know if this is an excepted practice but I've had my collets for 4 years now and do not have that problem. The one thing we did a few years ago was buy a torque wrench for the collets and that has improved the thread life. The tool is about $300 and well worth it. This may help your pr...
- Fri, Feb 02 2007, 2:57PM
- Forum: eCabinet Systems Software
- Topic: Small layouts when printing. Help please
- Replies: 3
- Views: 4359
Steve, I left you a phone message, did you get it? One way that you can print and control the size is to change the button on the tool bar from job to veiw and zoom and position the sheet then go to file/preveiw and make sure its in the right place. I also will print landscape to get the biggest vei...
- Thu, Feb 01 2007, 12:01PM
- Forum: Thermwood 3-Axis Machinery
- Topic: problems with dovetail drawers
- Replies: 7
- Views: 5576
Hey Mike, Just keep a look out for the depth issue on dovetails. The spoilboard and new switchspoil seemed to fix my problem but I'm still not sure what caused it. The odd thing is cab parts seemed to cut fine. If you notice on the first piece it cut thru the skin then you need to stop or you'll sta...
- Wed, Jan 31 2007, 4:37PM
- Forum: Thermwood 3-Axis Machinery
- Topic: problems with dovetail drawers
- Replies: 7
- Views: 5576
Mark, For whatever reason after we flycut and changed the switchspoil our parts are coming out good. The problem on my end seemed to arise after upgrading to 5.12 control nest but I can't narrow down if that is the culprite. Your parts are probably moving because the skin is being cut thru on the fi...
- Tue, Jan 30 2007, 5:17PM
- Forum: Thermwood 3-Axis Machinery
- Topic: problem with double-pass outlines
- Replies: 2
- Views: 3376
- Tue, Jan 30 2007, 5:12PM
- Forum: Thermwood 3-Axis Machinery
- Topic: problems with dovetail drawers
- Replies: 7
- Views: 5576