Thermwood / eCabinet Systems

Another solution is to specify a material size of 61 x 121? Or even bigger for that matter.
If you are looking for a realistic rendering you should find a way to show those shelves sagging about an inch . That way the client will not be surprised upon delivery.
Please don,t take offence

When the new build for CN writes code it now shows a pocket ID number. How do those pocket ID numbers relate to the dxf file?

So do you get oil on the material or puddles?

What brand of finish are you using? We use M L Campbell. When we have a problem thier sales rep come to the shop or I stop by the distributors facility where they have a complete testing and color sampling department . I like to stop in there because they have all the latest equiptment and thier man...

Being able to cut various fonts is a source of revenue that is badly needed. The lack of this ability to leave islands in your pockets is the biggest short falls of this software. Not just 1 island but multiple islands.

What I have been doing is run the outline on my spoil board then I take 1/16 inch thick foam tape from allstar adhesive and inline the profile . then I drill a 1/4 inch hole through the spoilboard . If I'm concerned about the tape holding up the edges and the middle being sucked down to the spoil bo...

Gerber Scientific sells a tool with a 1/2 inch shank and a replaceable knife. Made just for that purpose they also sell a pen so that you can turn your machine into a giant plotter. Hyatt's is the name of thier distributor 800 222 7446

To me it looks like a mdf door with veneer. Should not be that hard to do. Like Peter says use a single piece of glass. Make a templet to pattern route the Archs from the front and then route a rectangle in from the back half way through. Its the kind of Job that make you wish you had a cnc. You wou...

The reason i ask about Auto Cad is that I have had simular problems in the last few months with the control writing code that did not reflect the information that I had intered in Auto Cad. And the real problem was that it was not consistant by that I mean the control would write code for something ...

Nick
Are you using AutoCad For Dxf Files?

What do you think George ? I thought these guys were going to get a real game going and cut something . All this time they were just playing pocket pool.

I,ve been buying some 1/4 inch and 1/8 inch 4 flute up cut roughing tool From KBCtool that are fantastic The styrations left are hardly noticeable I have been using them for every thing. Actually I haven't loaded a 1/4 compression since I started using them. Call up and have them mail you a catalog ...

I only ask out of curiosity to see how other people handle the situation. I can cut that in one piece with my CS45 no problem. And you are right George you cut half a hemisphere from a block big enough to hold down with vacuum. then you cut the inverse shape into a 3" block of mdf as a holding ...

So now that you have the file how are you going to cut it?

When if ever are we going to have the ability to leave islands in the pockets? Using CN or Ecabinet? What is the problem? Is there no demand?