Thermwood / eCabinet Systems

Arthur,

There isn't a picture attached for your error message.

-Clint-

I'll add it to the wishlist.

-Clint-

We aren't ignoring the forum, usually I keep up on posts but its been a bit hectic here. I'm putting in requests for wishlist items for everything that can be. Wouldn't be nice if we could associate hardware hole patterns to user defined hardware such as leg levelers. Added to the wishlist. Wouldn't...

Terry,

Did you get this resolved with Daniel?

-Clint-

Forrest,

I'll pass this along to the software engineers.

-Clint-

Jake,

There is nothing in the software that allows that functionality for files outside of eCabinets.

-Clint-

Kerry, I'll add it to the wishlist. Don, Are you talking about the cutout done in Edit Wall View or the window in trim added in Elevation/Wall View? If it's in Elevation/Wall View, you can move them by selecting just the window or door, then change the Position on Wall on the left, or use shift and ...

Ian, Can you post the cabinet (or job of cabinets), and if they were made from seed cabinets, those cabinets? If it is too large to post, you can upload here https://info.thermwood.com/thermwood-file-upload-page, just make sure to reference this thread. There is a mismatch between parts and edge ban...

Anthony,

At the top of the page where you found the libraries is a box showing the 1334 error and how to resolve it.

-Clint-

Mark, Take an actual measurement of the flat depth of the pocket and the bottom of the ballnose bit's path. See which one is correct. That will help you point to where the problem is. Both should be the same as the CNC code tells them to go to the same depth so one is giving you wrong results. Regar...

Mark,

What is the measurement for depth of pocket for the ballnose bit, and depth of the flat pocket?

-Clint-

Mark, I replied to your email before looking at the CNC file. The pocket and the pocket cleanup are both commanded to go to -5 in Z. Is it supposed to be a radius at the bottom of the pocket? If it is supposed to be squared, my initial thought is a ballnose bit was loaded in place of an endmill and ...

Mark, The fix was for a scenario where a profile has been applied, then the cabinet resized and the error would come up. With the error you wouldn't be able to get to making a .twd. Your scenario looks like either daylight is off on a profiling tool, or an unexpected tool was used to profile (at lea...

While I haven't looked at your specific issue yet Mark (seems like when it rains it pours), but to add to what Kerry suggested, when removing standard parts such as tops, decks, etc, there is a difference between selecting them and deleting them, versus going to Construction Settings and unchecking ...

Yes. We won't release right before a holiday though. Should be Monday or Tuesday.

-Clint-