Thermwood / eCabinet Systems

I didn't know you where coming from custom layout. Yes, it looks like you cannot rotate one cabinet this way.

Make sure you select Cab on the second row of the toolbar. Then when you select the cabinet it will turn green. Now you can hold the shift key and drag with the right mouse button.

I believe I had that same error a few weeks ago. In my case I had a bad cable on my barcode scanner and the value scanned was missing a digit or two. I replaced the cable and haven't had the problem since. I think the error indicates that the control can't find the entered flip op # in the program. ...

Thanks for the info. I learn something new every day.

That's a great idea Josh. I've been thinking it would be nice to be able to name the NC file when it's created instead of automatically over-writing the existing file. I've run jobs with a large number of parts in two different materials. I create the NC file for the first material, then forget to r...

Thanks for the tips. I thought there must be some way.

Perhaps I'm just not looking in the right place but is there a way to start printing labels at a given label? I had a moment and had to stop printing labels for about 15 sheets part way through. I ended up printing the whole job again because I couldn't figure out how to start in the middle. Please ...

A word of caution. I ran two jobs yesterday where my customer used the new "Edit Material A Side" feature. For both jobs there is a row of shelf pin holes along the top of the second sheet near the right edge. On the third sheet there is one odd hole in the far upper right corner. None of ...

Chris,

Post a cabinet with this problem so we can take a look at it. I'm not seeing this problem with any of my seed cabinets.

Thanks everybody for the replies. I don't do much design work any more, just cutting customer jobs. Dennis Englert suggested in an email that the angled cabinet should work but that the angled cabinet does not allow partitions. I may be able to get past that limitation.

Thanks again.

I have a chance to cut library shelving for a room with a concave wall. The radius is about 15'. Cabinets are 12" deep. The attached 2 minute drawing shows the basic idea. Is it possible to do this in eCabinets? I'd like to take advantage of the joinery possible in eCabs and cut it on the route...

Thanks Kerry. Just what I couldn't seem to find.

I've checked the KV website but the documentation I found does not show the hole pattern for the 8400 slides. I find myself having to do design work for a customer who is using these slides. Does anyone have a hole pattern they would care to share, or at least know what the hole spacing is for the v...

I've upgraded my video driver and so far, no crashes.

Thanks for the help.

I just tried the repair but I have the same issue.