Thermwood / eCabinet Systems

Bryan That is not actulay what I am talking about not to say that that would not be a benifit but the reason for the cut direction that I am talking about is for a climb cut on tool group 1 witch consist of for example solid material and/or mdf, partical board etc. So that the cut direction would no...

1.Would it be possable to have a feature in the flip op first to nest or group as many flip ops as possable together per sheet. 2.Would it be possable to put the double pass option in the tool groups area for example no double pass for 1/4 material tool group and a double pass for 3/4 material tool ...

Neville I don't know if this will work for you but we made a booth for sanding.It has 3 sides the back wall has a back ,front and a top kind of like a closit the front has several 20"X20" sections for spray booth intake filters the fans are mounted in the top. and just vent back into the s...

I was looking in the show hide area in custom layout and see a option to show or hide snap markers but can not find where they are to use them. I looked in wall items but not there is this a feature that is no longer?

Hi John I dont have any experance with turbocad but I have 1 guestion that is are you wanting to import a dxf file from turbocad into ecab? If so you should be able do do this in shape maninager and or part editor depinding on what you are wanting to creat( a tool or a part). If you are wanting to s...

Thanks Scott,There back But what could have caused this in the first place? Maby I can prevent it from hapining again?

Just saterday I put lighting in a room and did a awsome presentantion vew on a drawing. Today wed. I put a cabinent in a room for another presentation when I selected light fixtures the only thing I see are the names of the lights with a white square and a red x in the upper left corner. No imiges. ...

Ryan,
Would that actualy make a 1/4 deep dado or a 1/2 deep dado in 3/4 material? The way I would make a 1/4 deep back dado in 3/4 material is back dado z0p5.

I thik I that I have the anser to my own question.The software will not make the miters on the styiles they have to go too the part editor and do the miter there.But why does the help guide lead me to belive it will do this in the construction settings. It clearly states that the left and right side...

I am making a angled front corner cab. uising ecab seed cabinet corner front. I click on corner settings and select angle front. Angled face frame settings is grayed out so I click ok. Go back to settings and click on face frames check has face frames go back to corner settings still grayed out. Sle...

Kerry, Would it be possable to creat the tool paths as a dxf file in another cad program and then add that file to the nest?
I have done this often with glass mullion doors that require multable profiles . havent had any problams so far

Ok I think I might have another one for the wish list. click on a part any part and rotate on the x,y,or z axes 1 deg 2 deg 22.5 deg 22.75 deg etc. and that part rotates curently the only way i can rotate a part is if it is a compleat cab. with the exception of stretchers, display panels ,display bo...

Glenn I have experimented with stretchers and have found out that the only way I could make a font to back stretcher is to click on a toe kick and a back or a left to right dtretcher in the up down position. What I was wanting to know was there another way to make one by selecting a end or perhaps a...

Ruben
can you post the wall and maby the line drawings I dont know if it can be don in ecab. or not but I think I could get some cabinets on that wall with sketchup.

Yes kerry I can see now by actualy gettin my hands wet why this is a mutch needed feature. I cant count how many times I have wandered how in the world a fixed shelf could be 1/32 above a mid rail if the boss had his library set up correct. One cab its perfict the next its off. The same for partitio...