Search found 69 matches
- Mon, Aug 29 2016, 11:44AM
- Forum: eCabinet Systems Software
- Topic: Calculating Cubic Feet
- Replies: 4
- Views: 6556
Calculating Cubic Feet
Hey guys, anyone know how to get the total cubic feet of a cabinet or batch of cabinets so that I know how much space they'll need in the truck?
- Sat, Aug 08 2015, 3:42PM
- Forum: eCabinet Systems Software
- Topic: Grain Match on multiple adjacent cabinets?
- Replies: 18
- Views: 22221
Re: Grain Match on multiple adjacent cabinets?
I'm glad to hear that you're going to try and have it added in the future Scott, but how do I proceed right now? I thought I could at least cut each cabinet individually and the SBL would nest the fronts appropriately, but as you can see below, it doesn't want to place the drawer front above the doo...
- Thu, Aug 06 2015, 8:57PM
- Forum: eCabinet Systems Software
- Topic: Grain Match on multiple adjacent cabinets?
- Replies: 18
- Views: 22221
Re: Grain Match on multiple adjacent cabinets?
Actually, only some of the fronts appear in the SBL nest. Here's a few pics to show you what I'm seeing. 1) The 3 cabinets saved as an assembly in EC (with grouped parts/fronts). 1.jpg 2) The EC nest diagram correctly nests the fronts of the assembly. 2.jpg 3) But only 4 fronts are nested in the SBL...
- Thu, Aug 06 2015, 8:23PM
- Forum: eCabinet Systems Software
- Topic: Grain Match on multiple adjacent cabinets?
- Replies: 18
- Views: 22221
Re: Grain Match on multiple adjacent cabinets?
So, back in April when you told me about this Rick, I tried it and took a look at the nest diagrams and everything looked fine. So I bid the job as if I could sequence the fronts. But now I'm actually trying to create and send a TWD file to my ShopBot link for cutting and it doesn't seem to give a d...
- Wed, Jul 22 2015, 10:38AM
- Forum: eCabinet Systems Software
- Topic: Hot Key Suggestions for LDE
- Replies: 0
- Views: 5107
Hot Key Suggestions for LDE
After reviewing the help file list as well as the 'eCabinetsSystemsMadeEasy.pdf', it appears to me that the Line Drawing Editor is sorely lacking from the benefits of any useable hot keys (aka: keyboard shortcuts). I spend a lot of time in the LDE & would like to request that at least the follow...
- Tue, Jul 21 2015, 9:41AM
- Forum: eCabinet Systems Software
- Topic: Hinge Hardware Holes on Doors & Gables
- Replies: 6
- Views: 8196
Re: Hinge Hardware Holes on Doors & Gables
I should clarify my item #1 below: This hinge hole ptn has holes in both the door & gable. Hey Neville, I hear what you're saying, but I believe that it's best suited to high-volume shops to simply throw away a piece & keep cutting because material is cheap. And my clients typically don't pi...
- Mon, Jul 20 2015, 5:48PM
- Forum: eCabinet Systems Software
- Topic: Copy pages between LDE jobs
- Replies: 6
- Views: 7885
Re: Copy pages between LDE jobs
Mike,
I like your idea of using a PDF app to add details to shop drawings. I use a free app called Foxit that allows me to do this & it's much more efficient at adding/copying/editing things like text, arrows, etc... to the pages than the LDE.
Thanks
I like your idea of using a PDF app to add details to shop drawings. I use a free app called Foxit that allows me to do this & it's much more efficient at adding/copying/editing things like text, arrows, etc... to the pages than the LDE.
Thanks
- Mon, Jul 20 2015, 5:38PM
- Forum: eCabinet Systems Software
- Topic: Hinge Hardware Holes on Doors & Gables
- Replies: 6
- Views: 8196
Re: Hinge Hardware Holes on Doors & Gables
That's a good point Ralph about keeping both faces untouched until after checking them. More options are always better....Thanks. BTW: I think this is how I'm going to handle this hardware hole pattern issue with in-house built doors. 1) Apply a hinge hole ptn to the doors to make my shop dwgs &...
- Mon, Jul 20 2015, 12:49PM
- Forum: eCabinet Systems Software
- Topic: Hinge Hardware Holes on Doors & Gables
- Replies: 6
- Views: 8196
Re: Hinge Hardware Holes on Doors & Gables
Oddly, if I apply the hinge hole ptn (door only) after I have applied the plate hole ptn (gable only), the gable holes are removed, and they do not return even if I re-add them. The only way to get both to display together seems to be to have all the holes in the hinge hole ptn.
- Mon, Jul 20 2015, 11:50AM
- Forum: eCabinet Systems Software
- Topic: Hinge Hardware Holes on Doors & Gables
- Replies: 6
- Views: 8196
Hinge Hardware Holes on Doors & Gables
Up until now, I've always ordered my doors from a supplier & drilled them for hinges manually. So I've always used a hinge hole pattern than contained both the the hinge (door holes) & the mounting plate (gable holes). EC would show me the location of the holes on the doors & gables, but...
- Sat, Jul 18 2015, 5:24PM
- Forum: eCabinet Systems Software
- Topic: Is there a way?
- Replies: 3
- Views: 4929
Re: Is there a way?
I'd like to take this principle a step higher. Is it possible to change the construction settings for multiple library cabs at one time? I've looked into the Adjustable Features/Global Item Modification area, but it doesn't allow me to do things like change adjustable shelf setback for an entire fol...
- Thu, Jul 16 2015, 3:21PM
- Forum: eCabinet Systems Software
- Topic: Copy pages between LDE jobs
- Replies: 6
- Views: 7885
Re: Copy pages between LDE jobs
Scott: Thanks, but that doesn't do what I need. Mike: I probably didn't explain it very well, so let me try again. 1) Standard Cabinets Shop Drawings Project: I want a static copy of all my std cabs in a single project file (each cab has it's own a page in the LDE). It would also be helpful if we co...
- Wed, Jul 15 2015, 10:17AM
- Forum: eCabinet Systems Software
- Topic: Drill adj shelf bottom for shelf pin
- Replies: 13
- Views: 13247
Re: Drill adj shelf bottom for shelf pin
I appreciate all the feedback & ideas guys. I'm sure this info will help others with similar problems. The one thing I've realized with this app is that often lets us do what we need to do by using some kind of work-arournd, but it's often very time & labour intensive & the result is (in...
- Tue, Jul 14 2015, 12:59PM
- Forum: eCabinet Systems Software
- Topic: Drill adj shelf bottom for shelf pin
- Replies: 13
- Views: 13247
Re: Drill adj shelf bottom for shelf pin
I just did a search and can't find anything on that Brad. I don't know how to get the KD pattern to attach to adj shelves, but I'm thinking if I could, it might work.
- Tue, Jul 14 2015, 12:53PM
- Forum: eCabinet Systems Software
- Topic: Drill adj shelf bottom for shelf pin
- Replies: 13
- Views: 13247
Re: Drill adj shelf bottom for shelf pin
Thanks for your reply Forrest, but I need something a wee-bit less time consuming and a whole lot more dynamic than that I'm afraid. I'm not interested in creating 4 statically located holes on each a/s manually. They need to dynamically align with the holes in the gables (in/out). Is there any way ...