Thermwood / eCabinet Systems

When I use windows unzip utility to extract all, the Auto Extract document unzips but the machinefilecollector application disappears and when I try to open Auto-extract document I get an error saying " Unable to load graphics conversion filter. Continue with Document conversion?" when I c...

Any news on the update? Its been 3 months since our machine has been installed and we still can't use the HHP for what we purchased it for. We have some parts coming in that we want to duplicate and having the capability of the HHP would be great.
Thanks T.

Thanks Pete, worked like a charm!

It would not let me attach a dxf file.

Not to long ago I got the cutting out circle issue solved by splitting the circle into 2 arcs, today I tried cutting out a vanity top that has 2 - 19x17 oval bowls in it. I sent the DXF to the machine but the ovals are not showing up in control nesting. I used 2 seperate arcs to form the ovals on a ...

Did I miss something at training? Why do you need a warm up program? As far as oiling goes ours oils to much, I'm always wiping oil off the machine sides.

Would that be the nice lady at the front entrance to Thermwood who has a little disk making factory under her desk and always a bowl of good candy?

I did the DAOinstall off the install disk as suggested in my last post and I'm still getting the Crypt Acquire error during creation off the TWD file. It doesn't happen every time, usually it's every third or fourth file creation.

I took the course last November and have the Sept 2007 manual, it is very helpful as reference because it is more of a manual.

Thanks guys got it working, I was using the break command to break the circle, once I used two arcs it was fine!

When I break the circle into arcs I get the error " A common close point was not found for an outline operation" if I remember right all outlines have to be a closed entity.

We are trying to cut out a 48" dia. table top out of 1 1/8 material. We are sending this to the machine as a DXF file when loading and selecting my material I get an error that says"The material selected for the Dxf part D:\ -part name- has the incorrect thickness the required thickness re...

Nice job Francis, where did you get the heat sensor your fans?

Thanks for the reply Dan, before you replied I found the M999 macro in the macros folder of the c drive, I opened it and made the changes there and saved the file, I don't know if that was the proper way but it seemed to have worked because the values where there when I did it your way.

When the tech set up our machine we cut our own jig out of plywood, now we want to make a new one and don't know where he entered the X,Z values for the G902 location, I remember him block stepping on something then entering the values?