Thermwood / eCabinet Systems

Hello Ryan I have figured out the issue i think its different issue its fine with dado as per your test, but if u have a pocket that is manually created pocket or a slot in ecabinets then it is not working, i have sent the separate cab file with out 5mm tool in that group and the required twd to tes...

#1.) I have created a general cab side with dado of 3/8", then made sure was NO tooling that could cut this dado (slightly smaller dia. tool than dia. or large enough dia. tool to cut dado within two passes) and did get the expected error of tool NOT FOUND. Maybe if I review your supporting fi...

With regards to item #3: I don't mean to offend anyone, but I find this to be absolutely broken. I am frequently asked to "fill up the sheet" with miscellaneous parts, and I no longer have the ability to do this in the load screen. As Mohan stated, having the ability to change the quantit...

Hello, I've just experienced the same ramp in problem that was spoken about in number 4. I changed my ramp in depth to .1 for now. That may be a temporary solution for you Mohan until the the situation is resolved. Mark Hello mark i would try that for now and i feel this issue will be addressed soo...

Mahon, Regarding Statement/Question #3: 3)cannot change the quantity to the required due to the recent upgrade as the quantity is being controled in the first line and all the parts qty is always 1 say even i need 3 cabs the parts remain same 1and the line 1shows 3cabs but lets assume i am repeatin...

thanks for that mark it helped me to solve 1 issue

thank you

hi all i have updated the machine with latest version and iam noticing different issues 1) not asking for a tool if a certain diameter tool is not setup it just takes any available last tool in that group (i.e if the slot is 6mm wide still if there is no tool of that size it starts cutting using 9.5...

hi all we are tying to build a shop counter and getting stuck here this cabinet has got 3 sections in which we want to have drawers on the both end sections and doors in the middle section but where as in the door and drawer selection it is selecting all the space as a single section where are we go...

Are you first shutting down the Thermwood software (Alt+X) before running the updates? If so, try the following: Download the attached 4.0 install file, rename it, changing the .txt extension to .exe, save it to your control desktop, shut down THM software (Alt+X), run the 4.0 install file, then ru...

Mohan, I would suggest running the latest control nesting update file that you have and choose the REPAIR option. It seems some files have been corrupt or misplaced on the hard drive of controller. i have done the repair using the latest update but still it is same, any other way to fix it as it is...

hi all all of a sudden today when i open control nesting i get this message attached
not sure why is this happening can someone look into this oce i click ok it message appears again
afterv two times it closes but sure got some issue in nesting also
pls suggest

regards
mohan

that would be a fast and asy way to change jobs and more economical if thermwood can implement this option

mohan

Larry Epplin wrote:I recommend upgrading to Version 6.0 Build 4 upon it's release.

hi larry
i also noticed one more issue in cn once nested if gong back into load menu due to any reson all the dimensions are in inches we are using mm
this is really mess try to suggest
thanks

Larry Epplin wrote:I recommend upgrading to Version 6.0 Build 4 upon it's release.

hi larry u mean to sAy version 5 is no longer supported or u peolple are forcing us to switch to version 6

This is an issue with eCabinets that will be resolved in the next update to Version 6. There were changes performed for optimization in Control Nesting that exposed the error from eCabinets. Until the release of Version 6 Build 4 you will need to uncheck these problem parts in the Load screen. Sorr...