Thermwood / eCabinet Systems

Need program for parts which are beyond my experience and software capabilities. These four parts have strict deadline so I am hoping I could hire one of you to write the cnc program for my CS 43. The problem is carving the area where two cove molding shapes make an inside corner. I have attached a ...

thank you Scott

sure scott
since. I did try to cut the door by it self and same thing happened.
the problem is with the lower door in attached cabinet.
thanks
JIm

Mario would it help if you were to build the island out of two cabinets instead of one . mixing and matching parts from two cabinets has made it posible for me to do some tricky stuff. play with material that is very thin or with eliminating parts. With out seeing what your trying to do its hard to ...

I did a profile cut on the back side of this door to create dado for glass. It surpised me to see the flip operation because the profile cut is on the inside of the door same as the hinges ( back of door). CN cut the profile cut first on the back of sheet, but it cut it at 90 degree to the door. it ...

Yes Brad
attached is the TWD file, extension was changed from TWD to txt.

thanks

when I nest the loaded parts in x or y direction I get the following error message. "Error appropriate start point for outline opperation 12 on panel not found. this is on my desk top , then when I go to Write CNC I get the following error. Encountered an improper argument. any body know how to...

Joe
that is what it is.
I don't normally use groups and keep the ignor groups boxed checked.

Thanks

thanks Josh

atttached is the export file
thanks
Jim

I do not know why I can not upload the export file. ?

I am getting an error message when I try to nest these parts. "you need to set a tool for Pocketin or Drilling in tooling for drill operation 53...... this error message repeats itself 16 times for for different parts. I assume it is referring to the 16 8mm holes the hinges. I cut several doors...

Mark Go to shape manager and create a ball nose shape for the size flutes you want. Make it into a tool on the same page. Go to cabinet/ assembly editor and create a display panel out of your preferred material the size of or larger then the finished product is going to be. Select the panel and go t...

Samples of some of the projects I made using only e-cabinet software.
But more times then not I find that ecabinets is not a 3d modeling.
But as a cabinet soft ware I doi not think there is any better.

Can the stock dust hood be improved on? I have a 43 and have noticed a couple of things, The specifications require a 6" vacuum pipe to be attached to the 4" lead pipe off the dust hood. Doesn't the difference in pipe sizes cause a reduction in velocity and capability of pulling debris thr...

Dave
I have one I can take a closer look at, where it would mount, would it be in the way of some of the tooling.
JIm