Thermwood / eCabinet Systems

Dan, Jon just posts on another forum that I visit. He and one of the guys from his shop built that web site and when they first launched it they used a song by Andrea Bocelli (Con te Partiro) for the background music. The flash movie was choreographed perfectly with the song. It was spectacular. I d...

Brian, I am copying an idea for a hood from Jon Giordano's web site. I thought it was a nice design. I should have the eCabinet drawings done tomorrow and I will post them if you like the design. That link is to a Flash presentation so you will have to scroll through a couple of pictures to see the ...

Keith,
Take your wine glasses into the display Part editor and change the RGB color of the glass to something lighter. the lightest is 250, 250, 250,
Kerry

Joe, I like to save the images as jpegs then open them using the image control (Irfanview) in eCabinets. After opening the image click on image on the menu bar then choose enhance colors. You can adjust the brightness and contrast here but I have had better luck using the Gamma Correction. Enter a G...

Dan, This is my job from a while back with the Out of Memory problem. I have started it over from scratch trying to find the problem. so far I have found several things wrong with the job. I don't know what caused the problems but I'll bet the eCabs guys can figure it out. Justin, Sorry to side trac...

First of all use the uppers that are on the angled wall not the uppers that have two 90 degree corners. Make sure you are using inches and fractions. Highlight the left upper cabinet enter a value of 12\" in the left numerical position box. hit enter mine just moves to 13 9/32\" not 12\&qu...

Dan,
Try the downlaod above again. It should point to the correct file now.
Kerry

Download
This job and try moving the upper cabinets and I think you will see what I mean.
Kerry

Dan, Try it with wall cabinets. Any job that I have with angled walls I can't move wall cabinets with the numerical entry. Place three wall cabinets on your wall an try to move one of them using the boxes. the error that Scott found is that eCabinets is letting us enter a value without clicking on a...

Justin,
I spoke to Scott Vaal at eCabinets about the problem with the numerical entry boxes not working. He thinks that he has found the solution so it will probably be fixed in the next build.
Kerry

Lorin,
You can cut a hole with a waterfall, Make sure you are clicking on the Select tool ( the Arrow at the upper left hand corner of the screen) before you try to select the cutout.
Kerry

Christopher,
I didn't have any problems placing them in a room. Have you tried after re-booting the computer?
I am not much help here.
You might create another room and try placing them in it.
Kerry

Lorin,
In Detail Room, Double click your counter top to highlight it then right click and choose Part Editor, this will send the top to the part editor where you can cut holes in it, round corners and profile edges.
Kerry

Joe, I will agree it is aggravating when you have lights hidden and take a room to the LDE and discover the lights are there and have to back out and get rid of them in detail room so that they don't show up in the line drawings. I just don't use many line drawings. is why I am not bothered much. Ke...

Hey Joe,
Hiding Lights in the Line Drawing Editor is way down on my wish list.
Kerry