Thermwood / eCabinet Systems

Leigh, Are you using the fillet command to create the radius corners (not the one in contour mode area)? I do it this way and then run a tool around it (that does not breech the corner rad.) and all works great. Being on the perimeter of the part like this will not even require you to add constraint...

Joe,

We are aware of this message. It is benign and it will be resolved in a patch due out soon. The “wild numbers” you speak of are nothing new and are that way by design in several fields. This is to maintain accuracy for fit and depth clearances and shelf pin hole diameters and spacing.

Greg, You will unfortunately have to edit each one to resolve this. In previous versions eCabinet Systems made assumptions on equations that caused problems for entries requiring dimensions. The resolution unfortunately caused the symptoms you are seeing. 5.2 bld 2 (due out soon) will have the addit...

Dan,

I cannot check your job in 5.1 (because it was saved in 5.2), but this issue did exist in 5.1 and 5.2 bld 1. I examined your scenario here and it is the same issue that we have addressed for bld 2.

Leigh, Yes it will. But please keep in mind, that it was designed to work with eCabinet Systems MDF doors which currently allow 2 profiles (interior & exterior). So, by you creating it via a back panel, it will use the Interior Custom tool for region #1 (the first profile cut path you created on...

Greg, The move and rotate functions in the Display Part Editor will only work for added peices and do not function on the 1st part loaded into the scene (which is considered the anchor part). So, if you load another stl/hsf in, you will be able to select it and do these operations to it. However, yo...

Gene & Terry,

We are aware of this issue. Sorry for the inconvenience. We plan to have a patch available to fix this. I can not give a time when the patch will be available yet, but know that we are working as diligently as possible. We appreciate your patience.

Jason, You can also rotate the Overhead/Main view and click on items to select it. Then you can press the Home key to get back to straight overhead view. You can move items while in a rotated position as well but keep in mind the movement may seem odd based on the rotation you are at (movement is al...

Sergio,

That message means that the memory has been exhausted. Is this something you can reproduce with a certain job?

Sergio,

How much RAM does you computer have?

Darrel,

If you can post that job and some steps to create a crash, that could be helpful for us in determining the cause. Please post it if you can.

Jean,

I unzipped it into a directory under Import and it loads ok for me. Did you unzip it??

Jean, The format did not change for display objects. What extension does the file have? It should be ".hsf". If it is ".stl", then it must be taken into the Display Part Editor first, textured etc. then saved. Did you save this file into a directory under the Import folder in the...

Gentlemen, There is an issue with Profile Modeler doing this additional offset incorrectly for the exterior profile when set to use "Custom Tool". This is listed and will be resolved for a future release of PM. I got Damon to cut the doors he needed by using a cabinet saved with just a bac...

Steve,

Do you typically have the job loaded that you run the CNC on? If so, would you run a test for me?
-> Start eCabs fresh.
-> Do NOT load the job!
-> Select the CNC Icon, choose this job and write it as you normally would.
...Does it crash?