Search found 81 matches
- Thu, Apr 15 2010, 1:25AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Control Nesting 5.57 - Drawer box issues
- Replies: 8
- Views: 6804
Re: Control Nesting 5.57 - Drawer box issues
Good Morning The zip file contains 1 cabinet out of a job file that I have trouble with the big negative value for the drawer box's. The drawer box exist of only a bottom and back, because we are using Blum DWD Tandem box slides. I have found now that if you load a cabinet with a full drawer box (bo...
- Wed, Apr 14 2010, 4:44AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Control Nesting 5.57 - Drawer box issues
- Replies: 8
- Views: 6804
Re: 5.57 update screen problem
Good Morning When I load a job where the sizes of the drawer box is list as W -50227620 or something, when you try to nest it, it freezes the hole computer (not even a Ctrl + Alt + Delete will get you out off absolute zero) I had to turn the Control off and back on again. If you deselect the drawer ...
- Wed, Apr 14 2010, 1:41AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Control Nesting 5.57 - Drawer box issues
- Replies: 8
- Views: 6804
Re: 5.57 update screen problem
I forgot:
Here is the .cab file from Control Nesting.
Cheers
Go!! Bulls!
Here is the .cab file from Control Nesting.
Cheers
Go!! Bulls!
- Wed, Apr 14 2010, 1:37AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Control Nesting 5.57 - Drawer box issues
- Replies: 8
- Views: 6804
Control Nesting 5.57 - Drawer box issues
Hello Again Just fine something else after updating. F11, F2, click on the load Load button in the main CN window, click on the load .TWD in the load window, load a .twd file. In the load window it gives the width and the length as follow W 1800mm L 950mm (which is right), click on OK, nest, everyth...
- Wed, Apr 14 2010, 12:26AM
- Forum: Thermwood 3-Axis Machinery
- Topic: 5.57 update screen problem
- Replies: 6
- Views: 7235
Re: 5.57 update screen problem
Good Morning I have the same problem after updating from V5.48 to V5.57. The display on the super control is a 15" LCD and the resolution is set to 1024x768. It is only capable of 1024x768 and 800x600. If you could up the resolution then that would have fix it , but I cannot. And you can not re...
- Mon, Feb 01 2010, 5:57AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Updates
- Replies: 10
- Views: 8652
Re: Updates
Good afternoon Larry
Ok, I have download the old .EXE update (V5.2 Build 5) and run it then choose the remove. I now do not get the pop up installer window any more.
Thanks
Marius
Ok, I have download the old .EXE update (V5.2 Build 5) and run it then choose the remove. I now do not get the pop up installer window any more.
Thanks
Marius
- Fri, Jan 29 2010, 12:04AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Updates
- Replies: 10
- Views: 8652
Re: Updates
Good Morning
I am sending you the file right now. I am back on CN V5.48 and did an export on that, do you want me to install V5.51 and then to an export?
Thanks
Marius
I am sending you the file right now. I am back on CN V5.48 and did an export on that, do you want me to install V5.51 and then to an export?
Thanks
Marius
- Tue, Jan 26 2010, 3:31AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Updates
- Replies: 10
- Views: 8652
Re: Updates
Good Morning Larry Ok so I download the old installer ecabinets v5.2 Biuld 6, run it and choose the remove option. Start up THM, F12, F2, CN loads and I click on load , Quest what? A pop window: Windows is preparing the installer for eCabinets V5.2 Build 5! Go to add remove programs and remove all t...
- Fri, Jan 15 2010, 1:06AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Updates
- Replies: 10
- Views: 8652
Re: Updates
Good morning Daniel We are not running Win2000 we are running WinXP. When we got our machine just a little over 3 years ago, I install ecabinets on the Supercontrol PC. I just increase the memory from the original 524meg to 2Gigs and a better graphics card, I also install Bobcad on the Supercontrol ...
- Thu, Jan 14 2010, 10:12AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Updates
- Replies: 10
- Views: 8652
Updates
Good afternoon Ok so this morning I decides to update eCabinets to version 6 and CN to V5.50 from 5.48. Want to start Supercontrol - get the following: This application has failed to start because MFC42D.DLL was not found. Then uninstall CN5.50 and reinstall V5.48, ok so now Supercontrol fire up aga...
- Mon, Nov 30 2009, 12:04AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Table Bearings
- Replies: 3
- Views: 4163
Re: Table Bearings
Ok, so nobody knows.
- Wed, Nov 25 2009, 1:00AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Router bits working their way out of collett
- Replies: 6
- Views: 5860
Re: Router bits working their way out of collett
Morning Neville It happen to me as well with my 8mm dado (compression) cutter when it cut 18mm deep or more. Here it happen quickly in a matter of like 300mm, it start pulling it out off the collet and snap it off. I set my max penetration for that cutter now to 10mm. When inspecting the cut that it...
- Wed, Nov 25 2009, 12:41AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Table Bearings
- Replies: 3
- Views: 4163
Table Bearings
Good Morning I want to take off the table and gantry track bearings to check and clean. I have read through the manual and everything, know that you must only take out one at a time. I wanted to begin at the table, but.....first off all our table have 6 bearings and not 4 like the manual say.....sec...
- Thu, Jul 23 2009, 2:38AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Rippled diagonal cut
- Replies: 5
- Views: 5146
Re: Rippled diagonal cut
Hi Stephen Have a look at the x-axis ballnut bearing on the table leadscrew, I bet you there is play there. We had the same problem here. We replace the ballbearing and it was ok for about 6 months, but now it start to show again so we just ordered a hole new ballnut and bearings from Thermwood. I m...
- Fri, Jun 26 2009, 3:49AM
- Forum: Thermwood 3-Axis Machinery
- Topic: Reinstall
- Replies: 6
- Views: 6144
Re: Reinstall
Rayn, Good morning I have sort the network out, and all is back to normal. I had E-cabinets on this machine as well, I have reinstall E-cabinets now but now I need a key. Can you maybe e-mail me a key? gouwsie@mweb.co.za One last thing. I have profile modeler version 1.1.0.0 now and have the update ...