Thermwood / eCabinet Systems

i think i have eliminated the thermwood machine as a source of contamination, the auto lube system used air tool oil, we tested a pice of ply with oil on it and could not produce the same result. we are guessing that we bot a bunk of bad material.

has anyone ever had any contamination from the lubrication mist from the auto lube system on their router getting on plywood and causing finishing problems. we have a whole pallet of cherry that is having major cratering in the finish, we have never had so much as one inch of cratering in our finish...

anyone care to chime in on this?

when doing flip opps, you must place the label generated for the flip in the lower left hand corner of the part standing at the machine with the home position to your right. when you run the flip you need to make the label go to the right side faceing down. you can change the fixture location where ...

it is very interesting that i spent thousands of hours learning my craft by hand and now i can spend many more learning all of these other manufacturing techniques. i have had my thermwood for three years and im always learning new things and pushing my envelope, i would like to get that picture whe...

with all thermwood products be paitent and take your time. when i installed my there was a problem and thermwood had to send me another version, so i wouldent have a bunch of parts waiting for the upgrade. hey brian did you ever get your sign cut out?

ok i finally got some time to mess with the profile modeler, created a part and generated code, but no outline cut, am i missing somthing here?, do i have to run the part through rolling nest to get the blank and then reposition the part and use the profile modeler to generate the rest of the code?

everytime i post on woodweb i am disopointed by the response, it does seem hostle, there are lots of sales people, it gets really old, i will say that a cuple of years ago i posted on the weekend about a problem i was having with my machine and i got a bunch of sales guys telling me my problem was m...

currently ecabinets only gives us overall dimensions for our doors and drawers, i know that there are alot of shops that dont make their own doors and drawers, but we do and i have to take all those dimensions and run them through a spread sheet to get our cutlist to go to the tigerstop, i belive th...

i cant even get a proper door and drawer cutlist out of the current version, how about we just let thermwood work on ecabinets for us cabinetmakers!

if you see anything like this that does not look correct do not run the job you will probibly end up with bad parts, i would contact thermwood and find out if the problem is ecabinets or rolling nest, save your material.

i screw my spoilboard down with nylon screws, this way i can keep pretty consistant tolorences with or without vacuum,

every software guy i have ever talked to has tried the end of the year deal on me or before the end of the month, they are like car sales men, any deal they offer you can be had again, dont make the mistake of giving the bobcad people your phone number or email address, i requested info on bocad thr...

hey brian if i were in your shoes i would look at buying artcam insignia. you can purchase the entry version for somthing like 800-1500 and then you can always upgrade to the pro version, that way you wont be burdened with too many reatures that you wont be using at first. the only drawback to artca...

hey brian i will take your image and get somting to you that you can cut, in all likelyhood you will need to use two diffrent tools to cut this out, ill create to geometry and let you know what tools you should have to cut this out, they do have exterior grade mdf its called extera, anything that co...